| Part Number : 311-2315-00 | Manufacturer : Tektronix Gmbh | ||
| NSN : 5905-01-318-8047 (5905013188047) | |||
| Item Name : Resistor Variable Nonwire Wound | CAGE Code : 80009 | ||
| NIIN : 01-318-8047 (013188047) | |||
| FSC Code : 5905 Resistors | |||
| FSG Code : 59 Electrical and Electronic Equipment Components | |||
| INC Code : 37405 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: 311231500 | |||
Thank you for taking an interest in part number 311-2315-00, that of which is listed with the description Resistor Variable Nonwire Wound; Manufactured by Tektronix Gmbh and listed alongside the NSN 5905013188047, part number 311-2315-00 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 311-2315-00 | Manufacturer : Tektronix Gmbh | ||
| NSN Number : 5905-01-318-8047 (5905013188047) | |||
| Item Name : Resistor Variable Nonwire Wound | CAGE Code : 80009 | ||
| NIIN : 013188047 | |||
| FSC CODE : 5905 Resistors | |||
Thank you for taking an interest in part number 311-2315-00, that of which is listed with the description Resistor Variable Nonwire Wound; Manufactured by Tektronix Gmbh and listed alongside the NSN 5905013188047, part number 311-2315-00 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-01-318-8047 Item PartTypeName: RESISTORVARIABLENONWIRE WOUND | 5905 | 013188047 | 0 | N | B | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | B | A | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 311-2315-00 | C | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ADAT | BODY WIDTH | 0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM |
| ADAU | BODY HEIGHT | 0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM |
| AEDQ | UNABLE TO DECODE | UNABLE TO DECODE AND UNABLE TO DECODE |
| AEDZ | UNABLE TO DECODE | UNABLE TO DECODE |
| AEFD | ACTUATOR TYPE | DUAL CONCENTRIC |
| AEFK | MAXIMUM STARTING TORQUE | 4.50 INCH-OUNCES |
| AEFP | NONTURN DEVICE RADIUS | 0.235 INCHES MINIMUM AND 0.266 INCHES MAXIMUM |
| APXH | UNABLE TO DECODE | UNABLE TO DECODE |
| AAPN | SECTION QUANTITY | 2 |
| AEFL | MAXIMUM RUNNING TORQUE | 1.00 INCH-OUNCES |
| AEFN | UNABLE TO DECODE | UNABLE TO DECODE |
| CQPH | DEVICE DESIGN TYPE | NONTURN AT 9 OCLOCK |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 ALL SECTIONS |
| CXHN | SHAFT BEARING TYPE | SLEEVE |
| AAQL | BODY STYLE | RECTANGULAR BUSHING MOUNTED |
| ABPA | UNDERCUT DIAMETER | 0.077 INCHES MINIMUM AND 0.079 INCHES MAXIMUM |
| ABWV | SHAFT DIAMETER | 0.124 INCHES MINIMUM AND 0.126 INCHES MAXIMUM |
| ABXF | SHAFT LENGTH | 0.844 INCHES MINIMUM AND 0.906 INCHES MAXIMUM |
| ADAQ | BODY LENGTH | 0.781 INCHES MINIMUM AND 0.812 INCHES MAXIMUM |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AGAV | END ITEM IDENTIFICATION | 6625-01-027-0265 GENERATOR,SWEEP |
| AJYN | SCREW THREAD DIAMETER | 0.250 INCHES NOMINAL |
| CBBL | FEATURES PROVIDED | HUMIDITY PROOF |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 10.0 KILOHMS 1ST SECTION AND 10.0 KILOHMS 2ND SECTION |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 0.5 FREE AIR ALL SECTIONS |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 ALL SECTIONS |
| TTQY | TERMINAL TYPE AND QUANTITY | 6 WIRE LOOP |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ADAP | MOUNTING BUSHING LENGTH | 0.244 INCHES MINIMUM AND 0.266 INCHES MAXIMUM |
| AEDX | SHAFT STYLE | ROUND,STEPPED |
| AGQL | UNDERCUT LENGTH | 0.250 INCHES NOMINAL |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNEF |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| AXGY | MOUNTING METHOD | STANDARD BUSHING |
| CBME | CUBIC MEASURE | 0.229 CUBIC INCHES |
| CQTM | TERMINAL LOCATION | LOWER ADJACENT SIDE SINGLE ROW |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
