| Part Number : 830877 | Manufacturer : Teledyne Controls Llc | ||
| NSN : 5905-00-884-0961 (5905008840961) | |||
| Item Name : Resistor Variable Wire Wound Non | CAGE Code : 98571 | ||
| NIIN : 00-884-0961 (008840961) | |||
| FSC Code : 5905 Resistors | |||
| FSG Code : 59 Electrical and Electronic Equipment Components | |||
| INC Code : 37406 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number 830877, that of which is listed with the description Resistor Variable Wire Wound Non; Manufactured by Teledyne Controls Llc and listed alongside the NSN 5905008840961, part number 830877 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 830877 | Manufacturer : Teledyne Controls Llc | ||
| NSN Number : 5905-00-884-0961 (5905008840961) | |||
| Item Name : Resistor Variable Wire Wound Non | CAGE Code : 98571 | ||
| NIIN : 008840961 | |||
| FSC CODE : 5905 Resistors | |||
Thank you for taking an interest in part number 830877, that of which is listed with the description Resistor Variable Wire Wound Non; Manufactured by Teledyne Controls Llc and listed alongside the NSN 5905008840961, part number 830877 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-00-884-0961 Item Description: Resistor Variable Wire Wound Non | 5905 | 008840961 | 0 | N | A | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 830877 | 3 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | RECTANGULAR W/MOUNTING HOLES |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABTB | MOUNTING HOLE DIAMETER | 0.093 INCHES NOMINAL |
| ABTD | MOUNTING SLOT WIDTH | 0.090 INCHES MINIMUM AND 0.096 INCHES MAXIMUM |
| ABWV | SHAFT DIAMETER | 0.060 INCHES NOMINAL |
| ABXF | SHAFT LENGTH | 0.100 INCHES MAXIMUM |
| ADAQ | BODY LENGTH | 0.500 INCHES NOMINAL |
| ADAT | BODY WIDTH | 0.187 INCHES NOMINAL |
| ADAU | BODY HEIGHT | 0.500 INCHES NOMINAL |
| AEDX | SHAFT STYLE | ROUND |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AGTP | LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS | 0.520 INCHES NOMINAL |
| AKPV | MOUNTING FACILITY QUANTITY | 2 |
| APXH | TERMINAL LOCATION | REAR END |
| AXGY | MOUNTING METHOD | UNTHREADED HOLE |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 10.0 OHMS SINGLE SECTION |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 1.0 FREE AIR SINGLE SECTION |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -3.0 TO 3.0 SINGLE SECTION |
| FEAT | SPECIAL FEATURES | SHAFT W/ALLEN HEAD |
| TEST | TEST DATA DOCUMENT | 98571-830877 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWI |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 WIRE LEAD |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
