| Part Number : 121399 | Manufacturer : Telemechanics Inc | ||
| NSN : 3010-00-835-0674 (3010008350674) | |||
| Item Name : Gearcase Motor | CAGE Code : 57712 | ||
| NIIN : 00-835-0674 (008350674) | |||
| FSC Code : 3010 Torque Converters and Speed Changers | |||
| FSG Code : 30 Mechanical Power Transmission Equipment | |||
| INC Code : 01102 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number 121399, that of which is listed with the description Gearcase Motor; Manufactured by Telemechanics Inc and listed alongside the NSN 3010008350674, part number 121399 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 121399 | Manufacturer : Telemechanics Inc | ||
| NSN Number : 3010-00-835-0674 (3010008350674) | |||
| Item Name : Gearcase Motor | CAGE Code : 57712 | ||
| NIIN : 008350674 | |||
| FSC CODE : 3010 Torque Converters and Speed Changers | |||
Thank you for taking an interest in part number 121399, that of which is listed with the description Gearcase Motor; Manufactured by Telemechanics Inc and listed alongside the NSN 3010008350674, part number 121399 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| MRC | Criteria | Characteristic |
|---|---|---|
| ABWV | Shaft Diameter | 0.2500 INCHES NOMINAL SINGLE END |
| ANPZ | Inclosure Feature | OPEN |
| CBBL | Features Provided | VERTICAL MOUNTING POSITION AND HORIZONTAL MOUNTING POSITION |
| ACDC | Current Type | AC INPUT |
| TTQY | Terminal Type And Quantity | 2 SOLDER LUG |
| AXCP | Winding Type | SYNCHRONOUS SHADED POLE |
| FEAT | Special Features | EXCEPT AS MODIFIED BY SHAT STYLE;TWO THD HOLES,1ST HOLE 0.625 IN. FROM SHAFT END,2ND HOLE 1.500 IN.FROM SHAFT END" |
| AXGY | Mounting Method | PAD |
| AXHR | Mounting Facility Type And Quantity | 4 THREADED HOLE |
| AAJT | Overall Height | 4.750 INCHES |
| AAJU | Overall Length | 2.749 INCHES |
| AAJV | Overall Width | 2.500 INCHES |
| CWCS | Length Of Shaft From Housing | 2.187 INCHES SINGLE END |
| CWFY | Nominal Center To Center Distance Between Mounting Facilities Parallel To Width | 1.562 INCHES |
| CWGD | Nominal Center To Center Distance Between Mounting Facilities Parallel To Height | 1.625 INCHES |
| CWGQ | Connection Type And Voltage Rating In Volts | 115.0 LINE TO NEUTRAL SINGLE INPUT |
| CWHK | Geared Head Output Shaft Speed Rating | 58.000 LOW REVOLUTIONS PER MINUTE SINGLE END AND 62.000 HIGH REVOLUTIONS PER MINUTE SINGLE END |
| CWHR | Angle Of Shaft To Mounting Base | 90.0 DEGREES SINGLE END |
| CWHZ | Shaft End Characteristic | A1 SINGLE STYLE SINGLE END |
| FAAZ | Phase | SINGLE INPUT |
| BFLY | Geared Head Output Shaft Alignment Position | OFFSET BELOW PARALLEL TO SHAFT AXIS SINGLE END |
| BFMF | Cooling Method | NATURAL CONVECTION VENTILATED |
| AKCT | Shaft Rotation Direction | COUNTERCLOCKWISE SINGLE END |
| BKPQ | Inclosure Specification | COMMERCIAL |
| AKPS | Duty Cycle | CONTINUOUS |
| FREQ | Frequency In Hertz | 50.0 INPUT OR 60.0 INPUT |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
