| Part Number : 712-50-2 | Manufacturer : Tempo Instrument Inc | ||
| NSN : 5905-00-833-4612 (5905008334612) | |||
| Item Name : Resistor Variable Nonwire Wound | CAGE Code : 07031 | ||
| NIIN : 00-833-4612 (008334612) | |||
| FSC Code : 5905 Resistors | |||
| FSG Code : 59 Electrical and Electronic Equipment Components | |||
| INC Code : 37405 | |||
| NCB Code : 00 | Country : USA | ||
| Alternate P/N: 712502 | |||
Thank you for taking an interest in part number 712-50-2, that of which is listed with the description Resistor Variable Nonwire Wound; Manufactured by Tempo Instrument Inc and listed alongside the NSN 5905008334612, part number 712-50-2 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 712-50-2 | Manufacturer : Tempo Instrument Inc | ||
| NSN Number : 5905-00-833-4612 (5905008334612) | |||
| Item Name : Resistor Variable Nonwire Wound | CAGE Code : 07031 | ||
| NIIN : 008334612 | |||
| FSC CODE : 5905 Resistors | |||
Thank you for taking an interest in part number 712-50-2, that of which is listed with the description Resistor Variable Nonwire Wound; Manufactured by Tempo Instrument Inc and listed alongside the NSN 5905008334612, part number 712-50-2 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-00-833-4612 Item PartTypeName: RESISTORVARIABLENONWIRE WOUND | 5905 | 008334612 | 0 | N | B | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | B | A | 0 | |||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 9156 | 2 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | CYLINDRICAL SERVO MOUNTED |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AAVM | PILOT LENGTH | 0.0620 INCHES NOMINAL |
| ABPC | UNDERCUT WIDTH | 0.0570 INCHES MINIMUM |
| ABPM | BODY DIAMETER | 1.073 INCHES MAXIMUM |
| ADAQ | BODY LENGTH | 0.768 INCHES NOMINAL |
| AECZ | MOUNTING LIP DIAMETER | 1.0620 INCHES NOMINAL |
| AEDA | MOUNTING LIP DEPTH | 0.0620 INCHES NOMINAL |
| AEDX | SHAFT STYLE | ROUND |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 343.0 MINIMUM |
| AEFL | MAXIMUM RUNNING TORQUE | 0.35 INCH-OUNCES |
| AEFY | SHAFT END PLAY | 0.00200 INCHES |
| AEGA | LATERAL RUNOUT | 0.0015 INCHES |
| AEGC | SHAFT RADIAL PLAY | 0.002 INCHES |
| AXGY | MOUNTING METHOD | CLAMP RING |
| CQTM | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| CRGM | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION ABSOLUTE LINEARITY |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 SINGLE SECTION |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION EQUATION |
| CXHN | SHAFT BEARING TYPE | BEARING |
| FEAT | SPECIAL FEATURES | 105 TOOTH GEAR ON REAR END OF RESISTOR |
| TEST | TEST DATA DOCUMENT | 96467-712-50 DRAWING (THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC.; EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWI |
| AAVL | PILOT DIAMETER | 0.9683 INCHES MINIMUM AND 0.9688 INCHES MAXIMUM |
| ABPA | UNDERCUT DIAMETER | 0.975 INCHES MAXIMUM |
| ABWV | SHAFT DIAMETER | 0.1242 INCHES MINIMUM AND 0.1247 INCHES MAXIMUM |
| ABXF | SHAFT LENGTH | 0.313 INCHES NOMINAL |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFK | MAXIMUM STARTING TORQUE | 0.35 INCH-OUNCES |
| AEFZ | SHAFT RUNOUT | 0.001 INCHES |
| AEGB | PILOT DIAMETER RUNOUT | 0.00100 INCHES |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 20.000 KILOHMS SINGLE SECTION |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 WIRE LEAD |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
