| Part Number : 52908 | Manufacturer : Tennant Company | ||
| NSN : 4720-01-355-7645 (4720013557645) | |||
| Item Name : Hose Assembly Nonmetallic | CAGE Code : 59500 | ||
| NIIN : 01-355-7645 (013557645) | |||
| FSC Code : 4720 Hose and Flexible Tubing | |||
| FSG Code : 47 Pipe Tubing Hose and Fittings | |||
| INC Code : 20311 | |||
| NCB Code : 01 | Country : USA | ||
Thank you for taking an interest in part number 52908, that of which is listed with the description Hose Assembly Nonmetallic; Manufactured by Tennant Company and listed alongside the NSN 4720013557645, part number 52908 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 52908 | Manufacturer : Tennant Company | ||
| NSN Number : 4720-01-355-7645 (4720013557645) | |||
| Item Name : Hose Assembly Nonmetallic | CAGE Code : 59500 | ||
| NIIN : 013557645 | |||
| FSC CODE : 4720 Hose and Flexible Tubing | |||
Thank you for taking an interest in part number 52908, that of which is listed with the description Hose Assembly Nonmetallic; Manufactured by Tennant Company and listed alongside the NSN 4720013557645, part number 52908 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 4720-01-355-7645 Item PartTypeName: HOSE ASSEMBLY,NONMETALLIC | 4720 | 013557645 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 52908 | 2 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND |
| AAJD | THREAD CLASS | 3B 1ST END |
| ABJH | TEMP RATING | -40.0 DEG FAHRENHEIT AND 250.0 DEG FAHRENHEIT SINGLE RESPONSE |
| AGAV | END ITEM IDENTIFICATION | G.H. TENNANT SCRUBBER |
| CRDW | HYDROSTATIC TEST PRESSURE | 4000.0 POUNDS PER SQUARE INCH |
| ABKV | OUTSIDE DIAMETER | 0.810 INCHES NOMINAL |
| AWLS | CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| CQBD | BURST TEST PRESSURE | 8000.0 POUNDS PER SQUARE INCH |
| CQJX | NOMINAL THREAD SIZE | 0.875 INCHES 1ST END |
| CQRB | SEAT ANGLE | 37.0 DEGREES 1ST END |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | OIL RESISTANT |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| CRXX | MEASURING METHOD AND LENGTH | 21.000 INCHES NOMINAL OVERALL |
| AAJF | THREAD DIRECTION | RIGHT-HAND 1ST END |
| AARX | INSIDE DIAMETER | 0.500 INCHES NOMINAL |
| ACKH | MINIMUM INSIDE BENDING RADIUS | 7.000 INCHES |
| AHNC | CONNECTION STYLE | SWIVEL NUT FLARE 1ST END |
| AKUU | END CONNECTION DESIGN | STRAIGHT 1ST END |
| CQCS | LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED STEEL WIRE AND OUTER LAYER MOLDED RUBBER,SYNTHETIC |
| CQGM | MAXIMUM OPERATING PRESSURE | 2000.0 POUNDS PER SQUARE INCH |
| MEDA | MEDIA FOR WHICH DESIGNED | FUEL/OIL,HYDROCARBON SINGLE RESPONSE |
| THSD | THREAD SERIES DESIGNATOR | UNF 1ST END |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
