| Part Number : 1405743 | Manufacturer : Terex Reedrill | ||
| NSN : 4320-01-417-5904 (4320014175904) | |||
| Item Name : Motor Hydraulic | CAGE Code : 03476 | ||
| NIIN : 01-417-5904 (014175904) | |||
| FSC Code : 4320 Power And Hand Pumps | |||
| FSG Code : 43 Pumps And Compressors | |||
| INC Code : 06128 | |||
| NCB Code : 01 | Country : USA | ||
Thank you for taking an interest in part number 1405743, that of which is listed with the description Motor Hydraulic; Manufactured by Terex Reedrill and listed alongside the NSN 4320014175904, part number 1405743 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 1405743 | Manufacturer : Terex Reedrill | ||
| NSN Number : 4320-01-417-5904 (4320014175904) | |||
| Item Name : Motor Hydraulic | CAGE Code : 03476 | ||
| NIIN : 014175904 | |||
| FSC CODE : 4320 Power And Hand Pumps | |||
Thank you for taking an interest in part number 1405743, that of which is listed with the description Motor Hydraulic; Manufactured by Terex Reedrill and listed alongside the NSN 4320014175904, part number 1405743 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| MRC | Criteria | Characteristic |
|---|---|---|
| MRC | Decoded Requirement | Clear Text Reply |
| AJLF | Housing Material | IRON, CAST |
| AAXX | Mounting Type | FLANGE |
| AJAB | Drive Shaft Type | SPLINED, INVOLUTE INTERNAL |
| AAPL | Torque Load Rating | 2780.0 INCH-POUNDS |
| AXFP | Displacement Type | CONSTANT |
| FEAT | Special Features | LOW SPEED HIGH TORQUE HYDRAULIC MOTOR; SHAFT: COLD ROLL STEEL; NO THUR SHAFT; O/A 4.780IN.L; 16.90LBS; USED ON REEDRILL INC. HPR1 DRILL |
| AECS | Bolt Hole Quantity | 4 |
| AWLS | Connection Type | INLET AND OUTLET |
| AEQC | Operating Speed At Rated Capacity In Rpm | 608 |
| AKCT | Shaft Rotation Direction | CLOCKWISE AND COUNTERCLOCKWISE |
| ABTJ | Mounting Hole Quantity | 4 |
| AGAV | End Item Identification | NAVY WEAPON SYSTEM CODE AR; SHIPBOARD MATERIAL, HANDLING EQUIPMENT (MHE) |
| AHNX | Bolt Hole Diameter | 0.312 INCHES NOMINAL |
| ASMM | Connection Quantity | 1 AND 1 |
| AXFC | Connection Design | FLANGED |
| AXFQ | Constant Displacement Per Revolution | 7.100 CUBIC INCHES |
| AZFF | Bolt Hole Spacing | G1.670IN. BY 2.150IN. |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
