Part Number : PC73530-1 | Manufacturer : Texas Instruments Inc | ||
NSN : 1270-01-070-3245 (1270010703245) | |||
Item Name : Microcircuit | CAGE Code : 01295 | ||
NIIN : 01-070-3245 (010703245) | |||
FSC Code : 1270 Aircraft Gunnery Fire Control Components | |||
FSG Code : 12 Fire Control Equipment | |||
INC Code : 77777 | |||
NCB Code : 01 | Country : USA | ||
Alternate P/N: PC735301 |
Thank you for taking an interest in part number PC73530-1, that of which is listed with the description Microcircuit; Manufactured by Texas Instruments Inc and listed alongside the NSN 1270010703245, part number PC73530-1 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
Part Number : PC73530-1 | Manufacturer : Texas Instruments Inc | ||
NSN Number : 1270-01-070-3245 (1270010703245) | |||
Item Name : Microcircuit | CAGE Code : 01295 | ||
NIIN : 010703245 | |||
FSC CODE : 1270 Aircraft Gunnery Fire Control Components |
Thank you for taking an interest in part number PC73530-1, that of which is listed with the description Microcircuit; Manufactured by Texas Instruments Inc and listed alongside the NSN 1270010703245, part number PC73530-1 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
MRC | Criteria | Characteristic |
---|---|---|
MRC | Decoded Requirement | Clear Text Reply |
TEXT | General Characteristics Item Description | MARKING OF DEVICE SHALL BE PERMANENT IN ACCORDANCE WITH MIL-STD-883 METHOD 2008 TEST CONDITION B;LEAD MATERIAL SHALL BE PER MIL-M-38510,LEAD FINISHSHALL BE HOT SOLDER DIP OR BRIGHT ACIDTIN PLATE PER MIL-M-38510;INDEX AREA NOTCH OR PIN ONE IDENTIFICATION MARK SHALL BE LOCATED ADJACENT TO PIN ONE ANDSHALL BE LOCATED WITHIN THE SHADED AREA SHOWN;MATERIALS CASE IS CERAMIC LEADMATERIAL AND FINISH SHALL BE PER PARAGRAPH 3.3.3;BASIC PIN SPACING IS .100 BETWEEN CENTERLINES;VOLTAGE BETWEEN V+ AND V- TERMINALS 32;OUTPUT SHORT CIRCUIT DURATION INDEFINITE;OPERATING TEMP RANGE -55 TO 125;STORAGE TEMPERATURE RANGE -65 TO 150 |
AGAV | End Item Identification | 1270-01-072-4555 |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote