| Part Number : 785-005-001 | Manufacturer : Texas Instruments Inc | ||
| NSN : 5305-01-052-1779 (5305010521779) | |||
| Item Name : Setscrew | CAGE Code : 57057 | ||
| NIIN : 01-052-1779 (010521779) | |||
| FSC Code : 5305 Screws | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 06672 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: 785005001 | |||
Thank you for taking an interest in part number 785-005-001, that of which is listed with the description Setscrew; Manufactured by Texas Instruments Inc and listed alongside the NSN 5305010521779, part number 785-005-001 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 785-005-001 | Manufacturer : Texas Instruments Inc | ||
| NSN Number : 5305-01-052-1779 (5305010521779) | |||
| Item Name : Setscrew | CAGE Code : 57057 | ||
| NIIN : 010521779 | |||
| FSC CODE : 5305 Screws | |||
Thank you for taking an interest in part number 785-005-001, that of which is listed with the description Setscrew; Manufactured by Texas Instruments Inc and listed alongside the NSN 5305010521779, part number 785-005-001 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-01-052-1779 Item PartTypeName: SETSCREW | 5305 | 010521779 | 0 | N | A | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | A | 0 | |||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 785-005-001 | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.059 INCHES MINIMUM AND 0.061 INCHES MAXIMUM |
| AASB | FASTENER LENGTH | 0.059 INCHES MINIMUM AND 0.061 INCHES MAXIMUM |
| AASK | HEAD STYLE | KNURLED NO. 1 |
| AASL | HEAD DIAMETER | 0.435 INCHES NOMINAL |
| AASU | HEAD HEIGHT | 0.250 INCHES NOMINAL |
| AAUH | SPLINE MINOR DIAMETER | 0.0255 INCHES MINIMUM AND 0.0265 INCHES MAXIMUM |
| AAUJ | SPLINE MAJOR DIAMETER | 0.034 INCHES MINIMUM AND 0.035 INCHES MAXIMUM |
| AAUK | SPLINE WIDTH | 0.0115 INCHES MINIMUM AND 0.0120 INCHES MAXIMUM |
| ABQJ | POINT STYLE | CUP |
| ABQZ | INTERNAL DRIVE STYLE | FOUR SPLINE |
| AHYM | NOMINAL THREAD DIAMETER | 0.060 INCHES |
| CMLP | THREAD QUANTITY PER INCH | 80 |
| CQFM | HARDNESS RATING | 34.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM OVERALL |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | NAVY SPECIAL PROJECT |
| MATT | MATERIAL | STEEL OVERALL |
| SFTT | SURFACE TREATMENT | CADMIUM AND CHROMATE OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 2,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNF |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
