| Part Number : MPD14242 | Manufacturer : Texas Instruments Inc | ||
| NSN : 5905-01-149-5116 (5905011495116) | |||
| Item Name : Resistor Variable Wire Wound Non | CAGE Code : 01295 | ||
| NIIN : 01-149-5116 (011495116) | |||
| FSC Code : 5905 Resistors | |||
| FSG Code : 59 Electrical and Electronic Equipment Components | |||
| INC Code : 37406 | |||
| NCB Code : 01 | Country : USA | ||
Thank you for taking an interest in part number MPD14242, that of which is listed with the description Resistor Variable Wire Wound Non; Manufactured by Texas Instruments Inc and listed alongside the NSN 5905011495116, part number MPD14242 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : MPD14242 | Manufacturer : Texas Instruments Inc | ||
| NSN Number : 5905-01-149-5116 (5905011495116) | |||
| Item Name : Resistor Variable Wire Wound Non | CAGE Code : 01295 | ||
| NIIN : 011495116 | |||
| FSC CODE : 5905 Resistors | |||
Thank you for taking an interest in part number MPD14242, that of which is listed with the description Resistor Variable Wire Wound Non; Manufactured by Texas Instruments Inc and listed alongside the NSN 5905011495116, part number MPD14242 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-01-149-5116 Item Description: RESISTOR,VARIABLE,WIRE WOUND,NON | 5905 | 011495116 | N | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| MPD14242 | 5 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| CSCY | TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS | -20.0 TO 20.0 SINGLE SECTION |
| AJYN | SCREW THREAD DIAMETER | 0.250 INCHES NOMINAL |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 0.5 FREE AIR SINGLE SECTION |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNEF |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 SINGLE SECTION |
| CSDL | STANDARD TAPER CURVE PER SECTION | A SINGLE SECTION |
| APXH | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 4.5 KILOHMS SINGLE SECTION |
| ABHP | III OVERALL LENGTH | 4.000 INCHES MAXIMUM |
| ABWV | SHAFT DIAMETER | 0.125 INCHES NOMINAL |
| CBBL | FEATURES PROVIDED | HUMIDITY PROOF |
| ABPM | BODY DIAMETER | 0.687 INCHES NOMINAL |
| AEDZ | SHAFT BEARING TYPE | SLEEVE |
| AEDX | SHAFT STYLE | ROUND |
| FEAT | SPECIAL FEATURES | W/DETENT AT 1050 OHMS FROM CCW END |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 125.0 SINGLE SECTION |
| ABXF | SHAFT LENGTH | 2.875 INCHES NOMINAL |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 TURRET |
| AFJN | III FRAGILITY FACTOR | MODERATELY RUGGED |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 300.0 NOMINAL |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 270.0 NOMINAL |
| AEFK | MAXIMUM STARTING TORQUE | 5.00 INCH-OUNCES |
| AEFL | MAXIMUM RUNNING TORQUE | 5.00 INCH-OUNCES |
| AEFM | MAXIMUM STOP TORQUE | 40.00 INCH-OUNCES |
| AEFN | NONTURN DEVICE LOCATION | AT 9 OCLOCK |
| AEFP | NONTURN DEVICE RADIUS | 0.234 INCHES NOMINAL |
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | CYLINDRICAL BUSHING MOUNTED |
| ADAP | MOUNTING BUSHING LENGTH | 0.250 INCHES NOMINAL |
| AXGY | MOUNTING METHOD | STANDARD BUSHING |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ADAV | III OVERALL DIAMETER | 1.124 INCHES MAXIMUM |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0 TO 5.0 SINGLE SECTION |
| ADAQ | BODY LENGTH | 1.125 INCHES MAXIMUM |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
