| Part Number : BACB30LU7 23 | Manufacturer : The Boeing Company | ||
| NSN : 5305-01-435-3461 (5305014353461) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 81205 | ||
| NIIN : 01-435-3461 (014353461) | |||
| FSC Code : 5305 Screws | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 29294 | |||
| NCB Code : 01 | Country : USA | ||
Thank you for taking an interest in part number BACB30LU7 23, that of which is listed with the description Screw Close Tolerance; Manufactured by The Boeing Company and listed alongside the NSN 5305014353461, part number BACB30LU7 23 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : BACB30LU7 23 | Manufacturer : The Boeing Company | ||
| NSN Number : 5305-01-435-3461 (5305014353461) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 81205 | ||
| NIIN : 014353461 | |||
| FSC CODE : 5305 Screws | |||
Thank you for taking an interest in part number BACB30LU7 23, that of which is listed with the description Screw Close Tolerance; Manufactured by The Boeing Company and listed alongside the NSN 5305014353461, part number BACB30LU7 23 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-01-435-3461 Item PartTypeName: SCREW,CLOSE TOLERANCE | 5305 | 014353461 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| BACB30LU7-23 | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AASK | HEAD STYLE | FLAT COUNTERSUNK |
| MATT | MATERIAL | STEEL COMP E4340 OR STEEL COMP 8740 OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416, TYPE 2 CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| AAJD | THREAD CLASS | 3A |
| AASA | THREAD LENGTH | 0.694 INCHES NOMINAL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OR AMS 6322 ASSN STD 2ND MATERIAL RESPONSE OVERALL |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASL | HEAD DIAMETER | 0.809 INCHES MINIMUM AND 0.892 INCHES MAXIMUM |
| ANEE | GRIP LENGTH | 1.4275 INCHES MINIMUM AND 1.4475 INCHES MAXIMUM |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
| AHYM | NOMINAL THREAD DIAMETER | 0.4375 INCHES |
| SFTT | SURFACE TREATMENT | CADMIUM AND CHROMATE OVERALL |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| AASB | FASTENER LENGTH | 2.1165 INCHES MINIMUM AND 2.1465 INCHES MAXIMUM |
| AAUR | GRIP DIAMETER | 0.4360 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM |
| CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| ABQZ | INTERNAL DRIVE STYLE | CROSS RECESS TYPE 1 |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
