| Part Number : PB20A | Manufacturer : Thomson Industries Inc | ||
| NSN : 3130-00-515-0008 (3130005150008) | |||
| Item Name : Bearing Unit Ball | CAGE Code : 96881 | ||
| NIIN : 00-515-0008 (005150008) | |||
| FSC Code : 3130 Bearings Mounted | |||
| FSG Code : 31 Bearings | |||
| INC Code : 30556 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number PB20A, that of which is listed with the description Bearing Unit Ball; Manufactured by Thomson Industries Inc and listed alongside the NSN 3130005150008, part number PB20A is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : PB20A | Manufacturer : Thomson Industries Inc | ||
| NSN Number : 3130-00-515-0008 (3130005150008) | |||
| Item Name : Bearing Unit Ball | CAGE Code : 96881 | ||
| NIIN : 005150008 | |||
| FSC CODE : 3130 Bearings Mounted | |||
Thank you for taking an interest in part number PB20A, that of which is listed with the description Bearing Unit Ball; Manufactured by Thomson Industries Inc and listed alongside the NSN 3130005150008, part number PB20A is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3130-00-515-0008 Item PartTypeName: BEARING UNIT,BALL | 3130 | 005150008 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| PB20A | 6 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABTB | MOUNTING HOLE DIAMETER | 0.3438 INCHES NOMINAL |
| ABXV | BORE DIAMETER | 1.2500 INCHES NOMINAL |
| ACYB | BASE THICKNESS | 0.4375 INCHES NOMINAL |
| ADFX | CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG WIDTH | 2.9900 INCHES MINIMUM AND 3.0100 INCHES MAXIMUM |
| ADFY | CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH | 1.8650 INCHES MINIMUM AND 1.8850 INCHES MAXIMUM |
| AFWC | HOUSING HEIGHT | 3.2500 INCHES NOMINAL |
| AFWE | HOUSING WIDTH | 4.0000 INCHES NOMINAL |
| AGNF | BASE LENGTH | 2.7500 INCHES NOMINAL |
| AGZA | ALIGNMENT TYPE | RIGID |
| AGZH | INTERNAL FIT-UP DESIGNATION | STANDARD |
| AHZC | ASSEMBLY OVERALL LENGTH | 3.6250 INCHES NOMINAL |
| AKRF | SEAL TYPE | CONTACT |
| AMCL | BLOCK TYPE | FIXED |
| ANJS | SHAFT END TYPE | OPEN |
| ANKF | SEAL LOCATION | BOTH ENDS |
| ANKK | LOAD CAPABILITY TYPE | RADIAL |
| ANKP | HEIGHT FROM BOTTOM OF BASE TO BORE CENTERLINE | 1.7450 INCHES MINIMUM AND 1.7550 INCHES MAXIMUM |
| CBBL | FEATURES PROVIDED | GROUND ROLLING ELEMENT GROOVE |
| CWJW | MOUNTING HOLE TYPE | ROUND,UNTHREADED |
| LBMA | LUBRICATION MATERIAL | GREASE |
| MATT | MATERIAL | IRON CAST HOUSING |
| MATT | MATERIAL | RUBBER SYNTHETIC SEAL |
| MATT | MATERIAL | STEEL COMP E52100 BALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AISI ASSN STD SINGLE MATERIAL RESPONSE BALL |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
