| Part Number : SPB-16 | Manufacturer : Thomson Industries Inc | ||
| NSN : 3130-01-144-8961 (3130011448961) | |||
| Item Name : Bearing Unit Ball | CAGE Code : 96881 | ||
| NIIN : 01-144-8961 (011448961) | |||
| FSC Code : 3130 Bearings Mounted | |||
| FSG Code : 31 Bearings | |||
| INC Code : 30556 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: SPB16 | |||
Thank you for taking an interest in part number SPB-16, that of which is listed with the description Bearing Unit Ball; Manufactured by Thomson Industries Inc and listed alongside the NSN 3130011448961, part number SPB-16 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : SPB-16 | Manufacturer : Thomson Industries Inc | ||
| NSN Number : 3130-01-144-8961 (3130011448961) | |||
| Item Name : Bearing Unit Ball | CAGE Code : 96881 | ||
| NIIN : 011448961 | |||
| FSC CODE : 3130 Bearings Mounted | |||
Thank you for taking an interest in part number SPB-16, that of which is listed with the description Bearing Unit Ball; Manufactured by Thomson Industries Inc and listed alongside the NSN 3130011448961, part number SPB-16 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3130-01-144-8961 Item PartTypeName: BEARING UNIT,BALL | 3130 | 011448961 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| SPB-16 | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABTB | MOUNTING HOLE DIAMETER | 0.2180 INCHES NOMINAL |
| ABXV | BORE DIAMETER | 0.9995 INCHES MINIMUM AND 1.0005 INCHES MAXIMUM |
| ACYB | BASE THICKNESS | 0.3800 INCHES NOMINAL |
| ADFX | CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG WIDTH | 2.8750 INCHES NOMINAL |
| ADFY | CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH | 1.7500 INCHES NOMINAL |
| AFWC | HOUSING HEIGHT | 2.1800 INCHES NOMINAL |
| AFWD | HOUSING LENGTH | 2.8200 INCHES NOMINAL |
| AFWE | HOUSING WIDTH | 3.2500 INCHES NOMINAL |
| AGKL | LUBRICATION FITTING TYPE | SELF LUBRICATED |
| AGZA | ALIGNMENT TYPE | SELF-ALIGNING |
| AGZH | INTERNAL FIT-UP DESIGNATION | STANDARD |
| AHZC | ASSEMBLY OVERALL LENGTH | 3.2500 INCHES NOMINAL |
| AKRF | SEAL TYPE | CONTACT |
| AMCL | BLOCK TYPE | FIXED |
| ANJS | SHAFT END TYPE | OPEN |
| ANKF | SEAL LOCATION | BOTH ENDS |
| ANKK | LOAD CAPABILITY TYPE | RADIAL AND THRUST |
| ANKP | HEIGHT FROM BOTTOM OF BASE TO BORE CENTERLINE | 1.1870 INCHES NOMINAL |
| CBBL | FEATURES PROVIDED | GROUND ROLLING ELEMENT GROOVE |
| CWJW | MOUNTING HOLE TYPE | ROUND,UNTHREADED |
| LBMA | LUBRICATION MATERIAL | OIL |
| MATT | MATERIAL | ALUMINUM ALLOY 6061 HOUSING |
| MATT | MATERIAL | RUBBER SYNTHETIC SEAL |
| MATT | MATERIAL | STEEL BEARING |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
