| Part Number : SPB-20-OPN-MODIFIED | Manufacturer : Thomson Industries Inc | ||
| NSN : 3130-01-318-2101 (3130013182101) | |||
| Item Name : Bearing Unit Ball | CAGE Code : 96881 | ||
| NIIN : 01-318-2101 (013182101) | |||
| FSC Code : 3130 Bearings Mounted | |||
| FSG Code : 31 Bearings | |||
| INC Code : 30556 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: SPB20OPNMODIFIED | |||
Thank you for taking an interest in part number SPB-20-OPN-MODIFIED, that of which is listed with the description Bearing Unit Ball; Manufactured by Thomson Industries Inc and listed alongside the NSN 3130013182101, part number SPB-20-OPN-MODIFIED is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : SPB-20-OPN-MODIFIED | Manufacturer : Thomson Industries Inc | ||
| NSN Number : 3130-01-318-2101 (3130013182101) | |||
| Item Name : Bearing Unit Ball | CAGE Code : 96881 | ||
| NIIN : 013182101 | |||
| FSC CODE : 3130 Bearings Mounted | |||
Thank you for taking an interest in part number SPB-20-OPN-MODIFIED, that of which is listed with the description Bearing Unit Ball; Manufactured by Thomson Industries Inc and listed alongside the NSN 3130013182101, part number SPB-20-OPN-MODIFIED is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3130-01-318-2101 Item Description: Bearing Unit Ball | 3130 | 013182101 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| Spb-20-Opn-Modified | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AMCL | BLOCK TYPE | FIXED |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-83286 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| ABTB | MOUNTING HOLE DIAMETER | 0.203 INCHES MINIMUM AND 0.235 INCHES MAXIMUM |
| AKRF | SEAL TYPE | CONTACT |
| ADFX | CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG WIDTH | 3.490 INCHES MINIMUM AND 3.510 INCHES MAXIMUM |
| MATT | MATERIAL | STEEL BEARING ALUMINUM ALLOY 6061 HOUSING RUBBER SYNTHETIC SEAL |
| ABXV | BORE DIAMETER | 1.2500 INCHES NOMINAL |
| ACYB | BASE THICKNESS | 0.407 INCHES MINIMUM AND 0.469 INCHES MAXIMUM |
| AFWC | HOUSING HEIGHT | 2.500 INCHES MINIMUM AND 2.624 INCHES MAXIMUM |
| ADFY | CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH | 1.990 INCHES MINIMUM AND 2.010 INCHES MAXIMUM |
| AGKL | LUBRICATION FITTING TYPE | SELF LUBRICATED |
| STYL | STYLE DESIGNATOR | PILLOW BLOCK, OPEN, ADJUSTABLE DIAMETER |
| SFTT | SURFACE TREATMENT | PLASTIC POLYURETHANE OVERALL |
| AGZA | ALIGNMENT TYPE | SELF-ALIGNING |
| ANKF | SEAL LOCATION | BOTH ENDS |
| ANKK | LOAD CAPABILITY TYPE | RADIAL AND THRUST |
| AFWD | HOUSING LENGTH | 3.250 INCHES MINIMUM AND 3.500 INCHES MAXIMUM |
| AFWE | HOUSING WIDTH | 3.938 INCHES MINIMUM AND 4.062 INCHES MAXIMUM |
| AGZH | INTERNAL FIT-UP DESIGNATION | STANDARD |
| ANJS | SHAFT END TYPE | OPEN |
| ANKP | HEIGHT FROM BOTTOM OF BASE TO BORE CENTERLINE | 1.497 INCHES MINIMUM AND 1.503 INCHES MAXIMUM |
| CWJW | MOUNTING HOLE TYPE | ROUND, UNTHREADED |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
