| Part Number : TWN-8 | Manufacturer : Thomson Industries Inc | ||
| NSN : 3130-01-342-2047 (3130013422047) | |||
| Item Name : Bearing Unit Ball | CAGE Code : 96881 | ||
| NIIN : 01-342-2047 (013422047) | |||
| FSC Code : 3130 Bearings Mounted | |||
| FSG Code : 31 Bearings | |||
| INC Code : 30556 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: TWN8 | |||
Thank you for taking an interest in part number TWN-8, that of which is listed with the description Bearing Unit Ball; Manufactured by Thomson Industries Inc and listed alongside the NSN 3130013422047, part number TWN-8 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
|
TWN-20
Thomson Industries Inc NSN: 3130-01-145-8457 CAGE Code: 96881 |
TWN-16
Thomson Industries Inc NSN: 3130-01-364-0112 CAGE Code: 96881 |
|
TWN-12-CR
Thomson Industries Inc NSN: 3130-01-310-2408 CAGE Code: 96881 |
TWN-6-ADJ
Thomson Industries Inc NSN: 3130-01-348-3792 CAGE Code: 96881 |
|
TWN-16-ADJ
Thomson Industries Inc NSN: 3130-01-283-9272 CAGE Code: 96881 |
TWN-12-OPN
Thomson Industries Inc NSN: 3130-01-112-0402 CAGE Code: 96881 |
| Part Number : TWN-8 | Manufacturer : Thomson Industries Inc | ||
| NSN Number : 3130-01-342-2047 (3130013422047) | |||
| Item Name : Bearing Unit Ball | CAGE Code : 96881 | ||
| NIIN : 013422047 | |||
| FSC CODE : 3130 Bearings Mounted | |||
Thank you for taking an interest in part number TWN-8, that of which is listed with the description Bearing Unit Ball; Manufactured by Thomson Industries Inc and listed alongside the NSN 3130013422047, part number TWN-8 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3130-01-342-2047 Item PartTypeName: BEARING UNIT,BALL | 3130 | 013422047 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| TWN-8 | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ADFX | CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG WIDTH | 1.6900 INCHES NOMINAL |
| ANJS | SHAFT END TYPE | OPEN |
| CWJW | MOUNTING HOLE TYPE | ROUND,UNTHREADED |
| AFWE | HOUSING WIDTH | 2.0000 INCHES NOMINAL |
| AGKL | LUBRICATION FITTING TYPE | SELF LUBRICATED |
| AKRF | SEAL TYPE | CONTACT |
| ANKF | SEAL LOCATION | BOTH ENDS |
| ANKK | LOAD CAPABILITY TYPE | RADIAL AND THRUST |
| ABXV | BORE DIAMETER | 0.5000 INCHES NOMINAL |
| ACYB | BASE THICKNESS | 0.2500 INCHES NOMINAL |
| ADFY | CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH | 2.5000 INCHES NOMINAL |
| AFWC | HOUSING HEIGHT | 1.2500 INCHES NOMINAL |
| AFWD | HOUSING LENGTH | 3.5000 INCHES NOMINAL |
| AGZA | ALIGNMENT TYPE | SELF-ALIGNING |
| AGZH | INTERNAL FIT-UP DESIGNATION | STANDARD |
| AMCL | BLOCK TYPE | FIXED |
| ANKP | HEIGHT FROM BOTTOM OF BASE TO BORE CENTERLINE | 0.6870 INCHES NOMINAL |
| LBMA | LUBRICATION MATERIAL | OIL |
| MATT | MATERIAL | STEEL BEARINGALUMINUM ALLOY 6061 HOUSINGRUBBER SYNTHETIC SEAL |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
