| Part Number : AJ38558 | Manufacturer : Timken Aerospace Inc | ||
| NSN : 3110-00-838-7064 (3110008387064) | |||
| Item Name : Bearing Roller Cylindrical | CAGE Code : 60380 | ||
| NIIN : 00-838-7064 (008387064) | |||
| FSC Code : 3110 Bearings Antifriction Unmounted | |||
| FSG Code : 31 Bearings | |||
| INC Code : 00015 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number AJ38558, that of which is listed with the description Bearing Roller Cylindrical; Manufactured by Timken Aerospace Inc and listed alongside the NSN 3110008387064, part number AJ38558 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : AJ38558 | Manufacturer : Timken Aerospace Inc | ||
| NSN Number : 3110-00-838-7064 (3110008387064) | |||
| Item Name : Bearing Roller Cylindrical | CAGE Code : 60380 | ||
| NIIN : 008387064 | |||
| FSC CODE : 3110 Bearings Antifriction Unmounted | |||
Thank you for taking an interest in part number AJ38558, that of which is listed with the description Bearing Roller Cylindrical; Manufactured by Timken Aerospace Inc and listed alongside the NSN 3110008387064, part number AJ38558 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3110-00-838-7064 Item PartTypeName: BEARING,ROLLER,CYLINDRICAL | 3110 | 008387064 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| ESJ74590-9D | 2 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AGVT | OUTER RING WIDTH | 1.1200 INCHES MINIMUM AND 1.1250 INCHES MAXIMUM |
| AGYE | SURFACE FINISH | GROUND |
| AGZF | LOCATING FEATURE | NONLOCATING |
| TEST | TEST DATA DOCUMENT | 51588-ESJ-74590 DRAWING (THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC.; EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DR |
| ABMK | OVERALL WIDTH | 1.1550 INCHES MINIMUM AND 1.1600 INCHES MAXIMUM |
| ABXV | BORE DIAMETER | 4.2990 INCHES MINIMUM AND 4.3000 INCHES MAXIMUM |
| ADGA | OVERALL OUTSIDE DIAMETER | 5.2490 INCHES MINIMUM AND 5.2500 INCHES MAXIMUM |
| AGVU | INNER RING WIDTH | 1.1550 INCHES MINIMUM AND 1.1600 INCHES MAXIMUM |
| AGYF | RETAINER FABRICATION METHOD | PRESSED |
| AGZD | BORE SHAPE | STRAIGHT |
| FEAT | SPECIAL FEATURES | INNER RING AND OUTER RING MARKED W/SAME SERIAL NO. SURFACE FINISH-INNER AND OUTER RING RACEWAY SURFACES 10 MICROINCHES AA,OD SURFACE OF ROLLERS 4 MICROINCHES AA,0.1250 IN. DIA HOLE LOCATED ON CENTERLINE OF OUTER RING |
| MATT | MATERIAL | STEEL OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | 114R2131,77272 MFR REF SINGLE MATERIAL RESPONSE OVERALL |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
