| Part Number : HRT-4C-F6 | Manufacturer : Timken Aerospace Inc | ||
| NSN : 3110-01-036-3057 (3110010363057) | |||
| Item Name : Cam Follower Needle Bearing | CAGE Code : 60380 | ||
| NIIN : 01-036-3057 (010363057) | |||
| FSC Code : 3110 Bearings Antifriction Unmounted | |||
| FSG Code : 31 Bearings | |||
| INC Code : 00040 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: HRT4CF6 | |||
Thank you for taking an interest in part number HRT-4C-F6, that of which is listed with the description Cam Follower Needle Bearing; Manufactured by Timken Aerospace Inc and listed alongside the NSN 3110010363057, part number HRT-4C-F6 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : HRT-4C-F6 | Manufacturer : Timken Aerospace Inc | ||
| NSN Number : 3110-01-036-3057 (3110010363057) | |||
| Item Name : Cam Follower Needle Bearing | CAGE Code : 60380 | ||
| NIIN : 010363057 | |||
| FSC CODE : 3110 Bearings Antifriction Unmounted | |||
Thank you for taking an interest in part number HRT-4C-F6, that of which is listed with the description Cam Follower Needle Bearing; Manufactured by Timken Aerospace Inc and listed alongside the NSN 3110010363057, part number HRT-4C-F6 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3110-01-036-3057 Item PartTypeName: CAM FOLLOWER,NEEDLE BEARING | 3110 | 010363057 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| HRT-4C-F6 | 5 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 2A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.5310 INCHES MINIMUM AND 0.5930 INCHES MAXIMUM |
| ABHP | OVERALL LENGTH | 1.1890 INCHES MINIMUM AND 1.2760 INCHES MAXIMUM |
| ADGA | OVERALL OUTSIDE DIAMETER | 0.8740 INCHES MINIMUM AND 0.8760 INCHES MAXIMUM |
| AGRJ | STUD DIAMETER | 0.3740 INCHES MINIMUM AND 0.3760 INCHES MAXIMUM |
| AGVT | OUTER RING WIDTH | 0.4640 INCHES MINIMUM AND 0.4690 INCHES MAXIMUM |
| AGXF | STUD LENGTH | 0.7250 INCHES MINIMUM AND 0.8070 INCHES MAXIMUM |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CQJX | NOMINAL THREAD SIZE | 0.375 INCHES |
| FEAT | SPECIAL FEATURES | NAS516 LUBRICATOR IN ROLLER END,COTTER PIN HOLE 0.106 IN. DIA LOCATED 0.156 IN. FROM END OF STUD |
| LBMA | LUBRICATION MATERIAL | GREASE |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE |
| MATT | MATERIAL | STEEL COMP E51100 OR STEEL COMP E52100 ROLLER |
| MATT | MATERIAL | STEEL COMP E52100 OR STEEL COMP 1070 OR STEEL COMP 1078 OR STEEL COMP 1080 OR STEEL COMP 1084 OR STEEL COMP 1090 OR STEEL COMP 1095 END PLATE |
| MATT | MATERIAL | STEEL COMP E52100 OR STEEL COMP 8620 OR STEEL COMP 8720 OR STEEL COMP 4620 OR STEEL COMP 8620H STUD |
| MATT | MATERIAL | STEEL COMP E52100 OUTER RING |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD 1ST MATERIAL RESPONSE OR MIL-S-7420 MIL SPEC 2ND MATERIAL RESPONSE ROLLER |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-7420 MIL SPEC SINGLE MATERIAL RESPONSE OUTER RING |
| SFTT | SURFACE TREATMENT | CADMIUM END PLATE |
| SFTT | SURFACE TREATMENT | CADMIUM STUD |
| SFTT | SURFACE TREATMENT | CHROMIUM OUTER RING |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-C-320,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OUTER RING |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 1,CL 2 FED SPEC SINGLE TREATMENT RESPONSE END PLATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 1,CL 2 FED SPEC SINGLE TREATMENT RESPONSE STUD |
| STYL | STYLE DESIGNATOR | CAM FOLLOWER |
| THSD | THREAD SERIES DESIGNATOR | UNF |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
