| Part Number : DW6FS464 | Manufacturer : Timken Corporation | ||
| NSN : 3110-00-011-9143 (3110000119143) | |||
| Item Name : Bearing Ball Annular | CAGE Code : 21335 | ||
| NIIN : 00-011-9143 (000119143) | |||
| FSC Code : 3110 Bearings Antifriction Unmounted | |||
| FSG Code : 31 Bearings | |||
| INC Code : 00014 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number DW6FS464, that of which is listed with the description Bearing Ball Annular; Manufactured by Timken Corporation and listed alongside the NSN 3110000119143, part number DW6FS464 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
|
4 cs electronic packaging inc
CAGE Code: 60744 |
3m co engineering document systems
CAGE Code: 1BY21 |
|
3m canada inc
CAGE Code: 09581,0GSY9,L2266 |
60 degrees pharmaceuticals llc
CAGE Code: 71D06 |
|
5dt inc
CAGE Code: 3BPF1 |
21st century paramount inc
CAGE Code: 55428 |
|
3m health care service center
CAGE Code: 0UTW7 |
1 nation technology corp
CAGE Code: 08DH5 |
|
43 apple hill llc
CAGE Code: 6AKU8 |
3 v fastener co inc
CAGE Code: 1ER65 |
|
1st solutions inc
CAGE Code: 0FY35,0TU77 |
3 y power technology inc
CAGE Code: 1XVP7 |
|
3m purification pty limited
CAGE Code: Z5295 |
4 seasons counting systems inc
CAGE Code: 0MHX5 |
|
3 com corporation
CAGE Code: 002S5,05PN6,0DPU4,0EWG6,0H6Y3,0L086,0PGJ9,0V0C3,0ZQ35,64034 |
| Part Number : DW6FS464 | Manufacturer : Timken Corporation | ||
| NSN Number : 3110-00-011-9143 (3110000119143) | |||
| Item Name : Bearing Ball Annular | CAGE Code : 21335 | ||
| NIIN : 000119143 | |||
| FSC CODE : 3110 Bearings Antifriction Unmounted | |||
Thank you for taking an interest in part number DW6FS464, that of which is listed with the description Bearing Ball Annular; Manufactured by Timken Corporation and listed alongside the NSN 3110000119143, part number DW6FS464 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3110-00-011-9143 Item PartTypeName: BEARING,BALL,ANNULAR | 3110 | 000119143 | N | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | ||||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 10352030 | 2 | 9 | 6 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABXV | BORE DIAMETER | 0.3745 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM |
| ADGA | OVERALL OUTSIDE DIAMETER | 1.0620 INCHES MINIMUM AND 1.0625 INCHES MAXIMUM |
| ADZG | UNABLE TO DECODE | UNABLE TO DECODE |
| AGVT | OUTER RING WIDTH | 1.0580 INCHES MINIMUM AND 1.0630 INCHES MAXIMUM |
| AGVU | INNER RING WIDTH | 1.1830 INCHES MINIMUM AND 1.1880 INCHES MAXIMUM |
| AGYE | SURFACE FINISH | GROUND |
| AGYJ | SEAL QUANTITY | 2 |
| AGYW | BEARING SEAL TYPE | CONTACT |
| AGZC | LOAD DIRECTION | ANGULAR |
| AGZD | BORE SHAPE | STRAIGHT |
| AGZH | INTERNAL FIT-UP DESIGNATION | STANDARD |
| AGZK | INTERNAL FIT-UP CONTACT ANGULAR DIRECTION | OUTWARD CONVERGENT |
| LBMA | LUBRICATION MATERIAL | GREASE |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE |
| MATT | MATERIAL | RUBBER SYNTHETIC SEAL |
| MATT | MATERIAL | STEEL COMP E52100 BALL |
| MATT | MATERIAL | STEEL COMP E52100 INNER RING |
| MATT | MATERIAL | STEEL COMP E52100 OUTER RING |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | 369A7971,02731 MFR REF SINGLE MATERIAL RESPONSE SEAL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | FED-STD-66 FED STD SINGLE MATERIAL RESPONSE BALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | FED-STD-66 FED STD SINGLE MATERIAL RESPONSE INNER RING |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | FED-STD-66 FED STD SINGLE MATERIAL RESPONSE OUTER RING |
| STYL | STYLE DESIGNATOR | NON-LOADING GROOVE,NON-SEPARABLE |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
