| Part Number : RAP3F5-2E9107A | Manufacturer : Timken Corporation | ||
| NSN : 3110-00-063-9706 (3110000639706) | |||
| Item Name : Bearing Ball Rod End | CAGE Code : 21335 | ||
| NIIN : 00-063-9706 (000639706) | |||
| FSC Code : 3110 Bearings Antifriction Unmounted | |||
| FSG Code : 31 Bearings | |||
| INC Code : 00049 | |||
| NCB Code : 00 | Country : USA | ||
| Alternate P/N: RAP3F52E9107A | |||
Thank you for taking an interest in part number RAP3F5-2E9107A, that of which is listed with the description Bearing Ball Rod End; Manufactured by Timken Corporation and listed alongside the NSN 3110000639706, part number RAP3F5-2E9107A is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : RAP3F5-2E9107A | Manufacturer : Timken Corporation | ||
| NSN Number : 3110-00-063-9706 (3110000639706) | |||
| Item Name : Bearing Ball Rod End | CAGE Code : 21335 | ||
| NIIN : 000639706 | |||
| FSC CODE : 3110 Bearings Antifriction Unmounted | |||
Thank you for taking an interest in part number RAP3F5-2E9107A, that of which is listed with the description Bearing Ball Rod End; Manufactured by Timken Corporation and listed alongside the NSN 3110000639706, part number RAP3F5-2E9107A is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3110-00-063-9706 Item Description: BEARING,BALL,ROD END | 3110 | 000639706 | N | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| RAP3F5-2E9107A | 6 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| FEAT | SPECIAL FEATURES | PRELUBRICATED WITH 40 TO 50 PERCENT OF SPECIFIED GREASE; MAX NO. LOAD STARTING TORQUE 0.6400 OZ; BEARING SHALL CONFORM TO GENERAL DYNAMICS F. W. SPEC C 3116; DRILL HOLE NO. 50 DRILL; THRU SHANK PARALLEL WITH BORE 0.3125 IN. FROM SHANK END; MILL SLOT IN SHANK END PARALLEL WITH BORE 0.0610 IN. DEEP BY 0.0700 IN. WIDE AND 0.0004 IN. RADIAL CLEARANCE |
| ASDB | WIDTH ACROSS FLATS | 0.4370 INCHES NOMINAL |
| AAZE | SHANK DIAMETER | 0.4370 INCHES NOMINAL |
| AAZF | SHANK STYLE | INTERNALLY THREADED W/HEXAGON END |
| STYL | STYLE DESIGNATOR | DOUBLE ROW, STAGGERED, BALL |
| MATT | MATERIAL | STEEL BALL STEEL INNER RING STEEL OUTER RING RUBBER SYNTHETIC SEAL STEEL SHAFT |
| ABXV | BORE DIAMETER | 0.1900 INCHES NOMINAL |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE |
| CQJX | NOMINAL THREAD SIZE | 0.312 INCHES |
| AAJD | THREAD CLASS | 3B |
| AGGY | SHANK THREAD LENGTH | 0.8125 INCHES NOMINAL |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| SFTT | SURFACE TREATMENT | CADMIUM OVERALL |
| AGVT | OUTER RING WIDTH | 0.3280 INCHES NOMINAL |
| ADZG | LUBRICATION MATERIAL | GREASE |
| AGVU | INNER RING WIDTH | 0.4370 INCHES NOMINAL |
| AGXH | LENGTH FROM BORE CENTER TO SHANK END | 1.3750 INCHES NOMINAL |
| CTLK | SELF-ALIGNMENT ANGLE | 10.00 DEGREES NOMINAL |
| AGYJ | SEAL QUANTITY | 2 |
| AGYW | BEARING SEAL TYPE | CONTACT |
| AGZA | ALIGNMENT TYPE | SELF-ALIGNING |
| ABHP | OVERALL LENGTH | 1.7650 INCHES NOMINAL |
| THSD | THREAD SERIES DESIGNATOR | UNF |
| CMLP | THREAD QUANTITY PER INCH | 24 |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
