| Part Number : MKP16BA1173 | Manufacturer : Timken Corporation | ||
| NSN : 3110-00-179-7563 (3110001797563) | |||
| Item Name : Bearing Ball Airframe | CAGE Code : 21335 | ||
| NIIN : 00-179-7563 (001797563) | |||
| FSC Code : 3110 Bearings Antifriction Unmounted | |||
| FSG Code : 31 Bearings | |||
| INC Code : 00041 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number MKP16BA1173, that of which is listed with the description Bearing Ball Airframe; Manufactured by Timken Corporation and listed alongside the NSN 3110001797563, part number MKP16BA1173 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : MKP16BA1173 | Manufacturer : Timken Corporation | ||
| NSN Number : 3110-00-179-7563 (3110001797563) | |||
| Item Name : Bearing Ball Airframe | CAGE Code : 21335 | ||
| NIIN : 001797563 | |||
| FSC CODE : 3110 Bearings Antifriction Unmounted | |||
Thank you for taking an interest in part number MKP16BA1173, that of which is listed with the description Bearing Ball Airframe; Manufactured by Timken Corporation and listed alongside the NSN 3110001797563, part number MKP16BA1173 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3110-00-179-7563 Item PartTypeName: BEARING,BALL,AIRFRAME | 3110 | 001797563 | N | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| A | ||||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| MKP16BA1173 | 6 | 9 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABXV | BORE DIAMETER | 0.9995 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM |
| ADGA | OVERALL OUTSIDE DIAMETER | 1.7495 INCHES MINIMUM AND 1.7500 INCHES MAXIMUM |
| AGVT | OUTER RING WIDTH | 0.3700 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM |
| AGVU | INNER RING WIDTH | 0.4345 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM |
| AGYJ | SEAL QUANTITY | 2 |
| AGYW | BEARING SEAL TYPE | CONTACT |
| AGZC | LOAD DIRECTION | RADIAL |
| FEAT | SPECIAL FEATURES | STARTING TORQUE 1.16 IN. OZ ALSO 40 TO 50 PCT FULL OF SPECIFIED GREASE ALSO 0.0002 IN. TO 0.0005 IN. RADIAL CLEARANCE ALSO SEALS RETAINED BY STAINLESS STEEL SNAP WASHERS |
| LBMA | LUBRICATION MATERIAL | GREASE |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE |
| MATT | MATERIAL | PLASTIC SEAL |
| MATT | MATERIAL | STEEL BALL |
| MATT | MATERIAL | STEEL INNER RING |
| MATT | MATERIAL | STEEL OUTER RING |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | REG TM,RSCM 31708 MFR REF SINGLE MATERIAL RESPONSE SEAL |
| SFTT | SURFACE TREATMENT | CADMIUM EXPOSED SURFACES AS MOUNTED |
| STYL | STYLE DESIGNATOR | SINGLE ROW INNER RING EXTENDED BOTH SIDES |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
