| Part Number : BCP4W10ANG25 | Manufacturer : Timken Corporation | ||
| NSN : 3110-00-198-1010 (3110001981010) | |||
| Item Name : Bearing Ball Bell Crank | CAGE Code : 21335 | ||
| NIIN : 00-198-1010 (001981010) | |||
| FSC Code : 3110 Bearings Antifriction Unmounted | |||
| FSG Code : 31 Bearings | |||
| INC Code : 00048 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number BCP4W10ANG25, that of which is listed with the description Bearing Ball Bell Crank; Manufactured by Timken Corporation and listed alongside the NSN 3110001981010, part number BCP4W10ANG25 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : BCP4W10ANG25 | Manufacturer : Timken Corporation | ||
| NSN Number : 3110-00-198-1010 (3110001981010) | |||
| Item Name : Bearing Ball Bell Crank | CAGE Code : 21335 | ||
| NIIN : 001981010 | |||
| FSC CODE : 3110 Bearings Antifriction Unmounted | |||
Thank you for taking an interest in part number BCP4W10ANG25, that of which is listed with the description Bearing Ball Bell Crank; Manufactured by Timken Corporation and listed alongside the NSN 3110001981010, part number BCP4W10ANG25 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3110-00-198-1010 Item PartTypeName: BEARING,BALL,BELL CRANK | 3110 | 001981010 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| BCP4W10FS464 | 6 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABXV | BORE DIAMETER | 0.2495 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM |
| AEPR | FLANGE OUTSIDE DIAMETER | 1.6150 INCHES MINIMUM AND 1.6350 INCHES MAXIMUM |
| AGFF | FLANGE WIDTH | 0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM |
| AGVT | OUTER RING WIDTH | 0.4950 INCHES MINIMUM AND 0.5050 INCHES MAXIMUM |
| AGVU | INNER RING WIDTH | 0.6200 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM |
| AGVV | OUTER RING OUTSIDE DIAMETER | 0.7400 INCHES MINIMUM AND 0.7600 INCHES MAXIMUM |
| AGVY | RIVET HOLE DIAMETER | 0.1400 INCHES MINIMUM AND 0.1450 INCHES MAXIMUM |
| AGYF | RETAINER FABRICATION METHOD | MACHINED |
| AGYJ | SEAL QUANTITY | 2 |
| AGYW | BEARING SEAL TYPE | CONTACT |
| AGZR | RIVET HOLE QUANTITY | 12 |
| CMPM | DISTANCE BETWEEN FLANGE HOLE CENTERS | 1.3070 INCHES MINIMUM AND 1.3170 INCHES MAXIMUM |
| LBMA | LUBRICATION MATERIAL | GREASE |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE |
| MATT | MATERIAL | RUBBER SYNTHETIC SEAL |
| MATT | MATERIAL | STEEL COMP E52100 BALL |
| MATT | MATERIAL | STEEL COMP E52100 INNER RING |
| MATT | MATERIAL | STEEL COMP E52100 OUTER RING |
| MATT | MATERIAL | STEEL COMP E52100 RETAINER |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AISI ASSN STD SINGLE MATERIAL RESPONSE BALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AISI ASSN STD SINGLE MATERIAL RESPONSE INNER RING |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AISI ASSN STD SINGLE MATERIAL RESPONSE OUTER RING |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AISI ASSN STD SINGLE MATERIAL RESPONSE RETAINER |
| SFTT | SURFACE TREATMENT | CADMIUM ALL EXTERNAL/EXPOSED METAL SURFACES |
| SFTT | SURFACE TREATMENT | CADMIUM BORE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 1,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE BORE |
| STYL | STYLE DESIGNATOR | DOUBLE ROW BALL,DOUBLE CLOSURE,RIGID INNER RING EXTENDED BOTH SIDES |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
