| Part Number : REP5M7 FS428 | Manufacturer : Timken Corporation | ||
| NSN : 3110-00-232-3329 (3110002323329) | |||
| Item Name : Bearing Ball Rod End | CAGE Code : 21335 | ||
| NIIN : 00-232-3329 (002323329) | |||
| FSC Code : 3110 Bearings Antifriction Unmounted | |||
| FSG Code : 31 Bearings | |||
| INC Code : 00049 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number REP5M7 FS428, that of which is listed with the description Bearing Ball Rod End; Manufactured by Timken Corporation and listed alongside the NSN 3110002323329, part number REP5M7 FS428 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : REP5M7 FS428 | Manufacturer : Timken Corporation | ||
| NSN Number : 3110-00-232-3329 (3110002323329) | |||
| Item Name : Bearing Ball Rod End | CAGE Code : 21335 | ||
| NIIN : 002323329 | |||
| FSC CODE : 3110 Bearings Antifriction Unmounted | |||
Thank you for taking an interest in part number REP5M7 FS428, that of which is listed with the description Bearing Ball Rod End; Manufactured by Timken Corporation and listed alongside the NSN 3110002323329, part number REP5M7 FS428 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3110-00-232-3329 Item PartTypeName: BEARING,BALL,ROD END | 3110 | 002323329 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| REP5M7 FS428 | 6 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAZE | SHANK DIAMETER | 0.4375 INCHES NOMINAL |
| AAZF | SHANK STYLE | EXTERNALLY THREADED |
| ABHP | OVERALL LENGTH | 3.0480 INCHES MINIMUM AND 3.0780 INCHES MAXIMUM |
| ABXV | BORE DIAMETER | 0.3122 INCHES MINIMUM AND 0.3125 INCHES MAXIMUM |
| ADGA | OVERALL OUTSIDE DIAMETER | 1.2400 INCHES MINIMUM AND 1.2600 INCHES MAXIMUM |
| AGGY | SHANK THREAD LENGTH | 1.5320 INCHES MINIMUM AND 1.5940 INCHES MAXIMUM |
| AGVT | OUTER RING WIDTH | 0.6460 INCHES MINIMUM AND 0.6660 INCHES MAXIMUM |
| AGVU | INNER RING WIDTH | 0.8650 INCHES MINIMUM AND 0.8700 INCHES MAXIMUM |
| AGXH | LENGTH FROM BORE CENTER TO SHANK END | 2.4280 INCHES MINIMUM AND 2.4480 INCHES MAXIMUM |
| AGYJ | SEAL QUANTITY | 2 |
| AGYW | BEARING SEAL TYPE | CONTACT |
| AGZA | ALIGNMENT TYPE | SELF-ALIGNING |
| AHAW | SELF-ALIGNMENT LOCATION | INTERNAL |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| CQJX | NOMINAL THREAD SIZE | 0.437 INCHES |
| CTLK | SELF-ALIGNMENT ANGLE | 10.00 DEGREES NOMINAL |
| LBMA | LUBRICATION MATERIAL | GREASE |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-81322 MIL SPEC SINGLE MATERIAL RESPONSE |
| MATT | MATERIAL | PLASTIC POLYTETRAFLUOROETHYLENE SEAL |
| MATT | MATERIAL | STEEL COMP 4130 OUTER RING |
| MATT | MATERIAL | STEEL COMP 4130 SHAFT |
| MATT | MATERIAL | STEEL COMP E52100 BALL |
| MATT | MATERIAL | STEEL COMP E52100 INNER RING |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 3652 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 3666 ASSN STD SINGLE MATERIAL RESPONSE SEAL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6758 MIL SPEC SINGLE MATERIAL RESPONSE OUTER RING |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6758 MIL SPEC SINGLE MATERIAL RESPONSE SHAFT |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-7420 MIL SPEC SINGLE MATERIAL RESPONSE BALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-7420 MIL SPEC SINGLE MATERIAL RESPONSE INNER RING |
| SFTT | SURFACE TREATMENT | CADMIUM OUTER RING |
| SFTT | SURFACE TREATMENT | CADMIUM ROD END BODY |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 1,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OUTER RING |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 1,CL 2 FED SPEC SINGLE TREATMENT RESPONSE ROD END BODY |
| STYL | STYLE DESIGNATOR | DOUBLE ROW,STAGGERED,BALL |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
