| Part Number : RAP4H8-3E9107A | Manufacturer : Timken Corporation | ||
| NSN : 3110-00-235-2414 (3110002352414) | |||
| Item Name : Bearing Ball Rod End | CAGE Code : 21335 | ||
| NIIN : 00-235-2414 (002352414) | |||
| FSC Code : 3110 Bearings Antifriction Unmounted | |||
| FSG Code : 31 Bearings | |||
| INC Code : 00049 | |||
| NCB Code : 00 | Country : USA | ||
| Alternate P/N: RAP4H83E9107A | |||
Thank you for taking an interest in part number RAP4H8-3E9107A, that of which is listed with the description Bearing Ball Rod End; Manufactured by Timken Corporation and listed alongside the NSN 3110002352414, part number RAP4H8-3E9107A is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : RAP4H8-3E9107A | Manufacturer : Timken Corporation | ||
| NSN Number : 3110-00-235-2414 (3110002352414) | |||
| Item Name : Bearing Ball Rod End | CAGE Code : 21335 | ||
| NIIN : 002352414 | |||
| FSC CODE : 3110 Bearings Antifriction Unmounted | |||
Thank you for taking an interest in part number RAP4H8-3E9107A, that of which is listed with the description Bearing Ball Rod End; Manufactured by Timken Corporation and listed alongside the NSN 3110002352414, part number RAP4H8-3E9107A is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3110-00-235-2414 Item Description: Bearing Ball Rod End | 3110 | 002352414 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| Rap4h8-3e9107a | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| STYL | STYLE DESIGNATOR | DOUBLE ROW, STAGGERED, BALL |
| ABHP | OVERALL LENGTH | 2.7190 INCHES NOMINAL |
| AAZE | SHANK DIAMETER | 0.6230 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE |
| AHAW | SELF-ALIGNMENT LOCATION | INTERNAL |
| AAZF | SHANK STYLE | HOLLOW |
| ADGA | OVERALL OUTSIDE DIAMETER | 0.9380 INCHES NOMINAL |
| AGVT | OUTER RING WIDTH | 0.4380 INCHES NOMINAL |
| ADZG | LUBRICATION MATERIAL | GREASE |
| MATT | MATERIAL | STEEL BALL STEEL INNER RING STEEL OUTER RING STEEL ROD END BODY RUBBER SYNTHETIC SEAL |
| AGVU | INNER RING WIDTH | 0.5880 INCHES MINIMUM AND 0.5930 INCHES MAXIMUM |
| AGXH | LENGTH FROM BORE CENTER TO SHANK END | 2.2500 INCHES NOMINAL |
| AGXJ | SHANK BORE DIAMETER | 0.5000 INCHES MINIMUM AND 0.5150 INCHES MAXIMUM |
| AGXK | SHANK BORE DEPTH | 0.8750 INCHES NOMINAL |
| CTLK | SELF-ALIGNMENT ANGLE | 10.00 DEGREES NOMINAL |
| AGYJ | SEAL QUANTITY | 2 |
| AGYW | BEARING SEAL TYPE | CONTACT |
| AGZA | ALIGNMENT TYPE | SELF-ALIGNING |
| FEAT | SPECIAL FEATURES | 0.0004 IN. MAX RADIALCLEARANCE,STARTING TORQUE0.052 INCH LBS MAX,SHANK VOID FILLED WITH NARMCO 3119 PUTTY,0.015 IN. BY 45 DEG CHAMFER ON OD OF SHANK |
| ABXV | BORE DIAMETER | 0.2498 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
