| Part Number : REP4H6FS243 | Manufacturer : Timken Corporation | ||
| NSN : 3110-00-799-9145 (3110007999145) | |||
| Item Name : Bearing Ball Rod End | CAGE Code : 21335 | ||
| NIIN : 00-799-9145 (007999145) | |||
| FSC Code : 3110 Bearings Antifriction Unmounted | |||
| FSG Code : 31 Bearings | |||
| INC Code : 00049 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number REP4H6FS243, that of which is listed with the description Bearing Ball Rod End; Manufactured by Timken Corporation and listed alongside the NSN 3110007999145, part number REP4H6FS243 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : REP4H6FS243 | Manufacturer : Timken Corporation | ||
| NSN Number : 3110-00-799-9145 (3110007999145) | |||
| Item Name : Bearing Ball Rod End | CAGE Code : 21335 | ||
| NIIN : 007999145 | |||
| FSC CODE : 3110 Bearings Antifriction Unmounted | |||
Thank you for taking an interest in part number REP4H6FS243, that of which is listed with the description Bearing Ball Rod End; Manufactured by Timken Corporation and listed alongside the NSN 3110007999145, part number REP4H6FS243 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3110-00-799-9145 Item PartTypeName: BEARING,BALL,ROD END | 3110 | 007999145 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| REP4H6FS570 | 6 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AGVU | INNER RING WIDTH | 0.5880 INCHES MINIMUM AND 0.5930 INCHES MAXIMUM |
| CTLK | SELF-ALIGNMENT ANGLE | 10.00 DEGREES NOMINAL |
| AAZE | SHANK DIAMETER | 0.6230 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM |
| AAZF | SHANK STYLE | HOLLOW |
| ABHP | OVERALL LENGTH | 2.3340 INCHES MINIMUM AND 2.3540 INCHES MAXIMUM |
| ABXV | BORE DIAMETER | 0.2497 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM |
| ADGA | OVERALL OUTSIDE DIAMETER | 0.9280 INCHES MINIMUM AND 0.9480 INCHES MAXIMUM |
| AGVT | OUTER RING WIDTH | 0.4280 INCHES MINIMUM AND 0.4480 INCHES MAXIMUM |
| AGXH | LENGTH FROM BORE CENTER TO SHANK END | 1.8650 INCHES MINIMUM AND 1.8850 INCHES MAXIMUM |
| AGXJ | SHANK BORE DIAMETER | 0.3860 INCHES NOMINAL |
| AGXK | SHANK BORE DEPTH | 1.2190 INCHES NOMINAL |
| AGYJ | SEAL QUANTITY | 2 |
| AGYW | BEARING SEAL TYPE | CONTACT |
| AGZA | ALIGNMENT TYPE | SELF-ALIGNING |
| AHAW | SELF-ALIGNMENT LOCATION | INTERNAL |
| FEAT | SPECIAL FEATURES | SHANK FILLED WITH NARCO NO. 3119 PUTTY |
| LBMA | LUBRICATION MATERIAL | GREASE |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE |
| MATT | MATERIAL | RUBBER SYNTHETIC SEAL |
| MATT | MATERIAL | STEEL BALL |
| MATT | MATERIAL | STEEL INNER RING |
| MATT | MATERIAL | STEEL OUTER RING |
| MATT | MATERIAL | STEEL SHAFT |
| SFTT | SURFACE TREATMENT | CADMIUM ALL EXTERNAL/EXPOSED METAL SURFACES |
| STYL | STYLE DESIGNATOR | DOUBLE ROW,STAGGERED,BALL |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
