| Part Number : REP3M6-2NFS210 | Manufacturer : Timken Corporation | ||
| NSN : 3110-00-839-4254 (3110008394254) | |||
| Item Name : Bearing Ball Rod End | CAGE Code : 21335 | ||
| NIIN : 00-839-4254 (008394254) | |||
| FSC Code : 3110 Bearings Antifriction Unmounted | |||
| FSG Code : 31 Bearings | |||
| INC Code : 00049 | |||
| NCB Code : 00 | Country : USA | ||
| Alternate P/N: REP3M62NFS210 | |||
Thank you for taking an interest in part number REP3M6-2NFS210, that of which is listed with the description Bearing Ball Rod End; Manufactured by Timken Corporation and listed alongside the NSN 3110008394254, part number REP3M6-2NFS210 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
|
1 nation electronics llc
CAGE Code: 1XP36 |
4 m company inc
CAGE Code: 1K407,57268 |
|
331 l tech productions llc
CAGE Code: 01XA0 |
1 source electronic components inc
CAGE Code: 3FY68 |
|
24 hour distributors
CAGE Code: 12136,3WKM0 |
3 v fastener co inc
CAGE Code: 1ER65 |
|
5 11 inc
CAGE Code: 3YEL6 |
184th air refueling wing
CAGE Code: 3EP27 |
|
4 r electro systems
CAGE Code: 1T600 |
4 ld inc
CAGE Code: 0ACW5 |
|
3 com/us robotics
CAGE Code: 1B8Q7 |
320 matlogpel breda centrale
CAGE Code: H2851 |
|
3m deutschland gmbh
CAGE Code: D2607 |
3 d machining inc
CAGE Code: 09SY7 |
|
3m purification pty limited
CAGE Code: Z5295 |
| Part Number : REP3M6-2NFS210 | Manufacturer : Timken Corporation | ||
| NSN Number : 3110-00-839-4254 (3110008394254) | |||
| Item Name : Bearing Ball Rod End | CAGE Code : 21335 | ||
| NIIN : 008394254 | |||
| FSC CODE : 3110 Bearings Antifriction Unmounted | |||
Thank you for taking an interest in part number REP3M6-2NFS210, that of which is listed with the description Bearing Ball Rod End; Manufactured by Timken Corporation and listed alongside the NSN 3110008394254, part number REP3M6-2NFS210 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3110-00-839-4254 Item PartTypeName: BEARING,BALL,ROD END | 3110 | 008394254 | N | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | ||||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| REP3M6-2N | 6 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAZE | SHANK DIAMETER | 0.3750 INCHES NOMINAL |
| AAZF | SHANK STYLE | EXTERNALLY THREADED |
| ABHP | OVERALL LENGTH | 1.7660 INCHES NOMINAL |
| ABXV | BORE DIAMETER | 0.1900 INCHES NOMINAL |
| ADGA | OVERALL OUTSIDE DIAMETER | 0.7810 INCHES NOMINAL |
| AGGY | SHANK THREAD LENGTH | 0.7500 INCHES NOMINAL |
| AGVT | OUTER RING WIDTH | 0.3280 INCHES NOMINAL |
| AGVU | INNER RING WIDTH | 0.4370 INCHES NOMINAL |
| AGXH | LENGTH FROM BORE CENTER TO SHANK END | 1.3750 INCHES NOMINAL |
| AGYJ | SEAL QUANTITY | 2 |
| AGYW | BEARING SEAL TYPE | CONTACT |
| AGZA | ALIGNMENT TYPE | SELF-ALIGNING |
| AHAW | SELF-ALIGNMENT LOCATION | INTERNAL |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CQJX | NOMINAL THREAD SIZE | 0.375 INCHES |
| CTLK | SELF-ALIGNMENT ANGLE | 10.00 DEGREES NOMINAL |
| LBMA | LUBRICATION MATERIAL | GREASE |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE |
| MATT | MATERIAL | RUBBER SYNTHETIC SEAL |
| MATT | MATERIAL | STEEL BALL |
| MATT | MATERIAL | STEEL INNER RING |
| MATT | MATERIAL | STEEL OUTER RING |
| MATT | MATERIAL | STEEL SHAFT |
| SFTT | SURFACE TREATMENT | CADMIUM ALL EXTERNAL/EXPOSED METAL SURFACES |
| STYL | STYLE DESIGNATOR | DOUBLE ROW,STAGGERED,BALL |
| THSD | THREAD SERIES DESIGNATOR | UNF |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
