| Part Number : RAP4H8-2E9107A | Manufacturer : Timken Corporation | ||
| NSN : 3110-00-917-7818 (3110009177818) | |||
| Item Name : Bearing Ball Rod End | CAGE Code : 21335 | ||
| NIIN : 00-917-7818 (009177818) | |||
| FSC Code : 3110 Bearings Antifriction Unmounted | |||
| FSG Code : 31 Bearings | |||
| INC Code : 00049 | |||
| NCB Code : 00 | Country : USA | ||
| Alternate P/N: RAP4H82E9107A | |||
Thank you for taking an interest in part number RAP4H8-2E9107A, that of which is listed with the description Bearing Ball Rod End; Manufactured by Timken Corporation and listed alongside the NSN 3110009177818, part number RAP4H8-2E9107A is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
|
3h products co
CAGE Code: 0CJ60 |
4 m company inc
CAGE Code: 1K407,57268 |
|
3m purification pty limited
CAGE Code: Z5295 |
3s group inc
CAGE Code: 07CN0 |
|
3m france
CAGE Code: F0347 |
10zig technology inc
CAGE Code: 49E04 |
|
3m australia pty ltd
CAGE Code: Z0040,ZA992,ZD110,ZW687 |
21st century enterprises inc
CAGE Code: 56589 |
|
3m deutschland gmbh
CAGE Code: D2607 |
20th century fiberglass
CAGE Code: 80241 |
|
2101 llc
CAGE Code: 1GH76 |
1343080 alberta ltd
CAGE Code: L0796 |
|
3 com/us robotics
CAGE Code: 1B8Q7 |
3d instruments llc
CAGE Code: 1XHY4,52159,64528 |
|
5dt inc
CAGE Code: 3BPF1 |
| Part Number : RAP4H8-2E9107A | Manufacturer : Timken Corporation | ||
| NSN Number : 3110-00-917-7818 (3110009177818) | |||
| Item Name : Bearing Ball Rod End | CAGE Code : 21335 | ||
| NIIN : 009177818 | |||
| FSC CODE : 3110 Bearings Antifriction Unmounted | |||
Thank you for taking an interest in part number RAP4H8-2E9107A, that of which is listed with the description Bearing Ball Rod End; Manufactured by Timken Corporation and listed alongside the NSN 3110009177818, part number RAP4H8-2E9107A is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3110-00-917-7818 Item PartTypeName: BEARING,BALL,ROD END | 3110 | 009177818 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| REP-4-H-8-6 | 6 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAZE | SHANK DIAMETER | 0.6250 INCHES NOMINAL |
| AAZF | SHANK STYLE | HOLLOW |
| ABHP | OVERALL LENGTH | 2.0930 INCHES NOMINAL |
| ABXV | BORE DIAMETER | 0.2500 INCHES NOMINAL |
| ADGA | OVERALL OUTSIDE DIAMETER | 0.9380 INCHES NOMINAL |
| AGVT | OUTER RING WIDTH | 0.4380 INCHES NOMINAL |
| AGVU | INNER RING WIDTH | 0.9380 INCHES NOMINAL |
| AGXH | LENGTH FROM BORE CENTER TO SHANK END | 1.6250 INCHES NOMINAL |
| AGXJ | SHANK BORE DIAMETER | 0.5150 INCHES NOMINAL |
| AGXK | SHANK BORE DEPTH | 0.8750 INCHES NOMINAL |
| AGYJ | SEAL QUANTITY | 2 |
| AGYW | BEARING SEAL TYPE | CONTACT |
| AGZA | ALIGNMENT TYPE | SELF-ALIGNING |
| AHAW | SELF-ALIGNMENT LOCATION | INTERNAL |
| CTLK | SELF-ALIGNMENT ANGLE | 10.00 DEGREES NOMINAL |
| FEAT | SPECIAL FEATURES | HOLLOW SHANK FILLED WITH FMS1026 ASS 3,TYPE A ROTTING COMPOUND,0.0040 IN. MAX RADIAL CLEARANCE,PACKED WITH 40 TO 50 PCT OF SPECIFIED |
| LBMA | LUBRICATION MATERIAL | GREASE |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE |
| MATT | MATERIAL | RUBBER SYNTHETIC SEAL |
| MATT | MATERIAL | STEEL BALL |
| MATT | MATERIAL | STEEL INNER RING |
| MATT | MATERIAL | STEEL OUTER RING |
| MATT | MATERIAL | STEEL SHAFT |
| SFTT | SURFACE TREATMENT | CADMIUM ALL EXTERNAL/EXPOSED METAL SURFACES |
| STYL | STYLE DESIGNATOR | DOUBLE ROW,STAGGERED,BALL |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
