| Part Number : REP3M4-6 | Manufacturer : Timken Corporation | ||
| NSN : 3110-00-983-7407 (3110009837407) | |||
| Item Name : Bearing Ball Rod End | CAGE Code : 21335 | ||
| NIIN : 00-983-7407 (009837407) | |||
| FSC Code : 3110 Bearings Antifriction Unmounted | |||
| FSG Code : 31 Bearings | |||
| INC Code : 00049 | |||
| NCB Code : 00 | Country : USA | ||
| Alternate P/N: REP3M46 | |||
Thank you for taking an interest in part number REP3M4-6, that of which is listed with the description Bearing Ball Rod End; Manufactured by Timken Corporation and listed alongside the NSN 3110009837407, part number REP3M4-6 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
|
3m co electronics and communications
CAGE Code: 0ESF3,17325,70209,8M369 |
2709th af vehicle control group
CAGE Code: 10994 |
|
3m australia pty ltd
CAGE Code: Z0040,ZA992,ZD110,ZW687 |
3d instruments llc
CAGE Code: 1XHY4,52159,64528 |
|
2eme regiment du materiel
CAGE Code: FARD5 |
4dsp llc
CAGE Code: 31UJ9 |
|
184th air refueling wing
CAGE Code: 3EP27 |
5 11 inc
CAGE Code: 3YEL6 |
|
136963 canada inc
CAGE Code: 3AD36 |
3d
CAGE Code: 0WY47 |
|
3m telecom system group
CAGE Code: 0Y7Y1 |
3m industrial adhesives and tapes
CAGE Code: 0XV20 |
|
3m touch systems canada ltd
CAGE Code: L0831 |
320 matlogpel breda centrale
CAGE Code: H2851 |
|
21st century paramount inc
CAGE Code: 55428 |
| Part Number : REP3M4-6 | Manufacturer : Timken Corporation | ||
| NSN Number : 3110-00-983-7407 (3110009837407) | |||
| Item Name : Bearing Ball Rod End | CAGE Code : 21335 | ||
| NIIN : 009837407 | |||
| FSC CODE : 3110 Bearings Antifriction Unmounted | |||
Thank you for taking an interest in part number REP3M4-6, that of which is listed with the description Bearing Ball Rod End; Manufactured by Timken Corporation and listed alongside the NSN 3110009837407, part number REP3M4-6 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3110-00-983-7407 Item PartTypeName: BEARING,BALL,ROD END | 3110 | 009837407 | N | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| A | 0 | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| REP3M4-6 | 6 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAZE | SHANK DIAMETER | 0.2500 INCHES NOMINAL |
| AAZF | SHANK STYLE | EXTERNALLY THREADED |
| ABHP | OVERALL LENGTH | 1.9530 INCHES NOMINAL |
| ABXV | BORE DIAMETER | 0.1900 INCHES NOMINAL |
| ADGA | OVERALL OUTSIDE DIAMETER | 0.7810 INCHES NOMINAL |
| AGGY | SHANK THREAD LENGTH | 1.0000 INCHES NOMINAL |
| AGVT | OUTER RING WIDTH | 0.3280 INCHES NOMINAL |
| AGVU | INNER RING WIDTH | 0.4370 INCHES NOMINAL |
| AGXH | LENGTH FROM BORE CENTER TO SHANK END | 1.5625 INCHES NOMINAL |
| AGYJ | SEAL QUANTITY | 2 |
| AGYW | BEARING SEAL TYPE | CONTACT |
| AGZA | ALIGNMENT TYPE | SELF-ALIGNING |
| AHAW | SELF-ALIGNMENT LOCATION | EXTERNAL |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| CQJX | NOMINAL THREAD SIZE | 0.250 INCHES |
| CTLK | SELF-ALIGNMENT ANGLE | 10.00 DEGREES NOMINAL |
| LBMA | LUBRICATION MATERIAL | GREASE |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE |
| MATT | MATERIAL | RUBBER SYNTHETIC SEAL |
| MATT | MATERIAL | STEEL BALL |
| MATT | MATERIAL | STEEL INNER RING |
| MATT | MATERIAL | STEEL OUTER RING |
| MATT | MATERIAL | STEEL SHAFT |
| SFTT | SURFACE TREATMENT | CADMIUM ALL EXTERNAL/EXPOSED METAL SURFACES |
| STYL | STYLE DESIGNATOR | DOUBLE ROW,STAGGERED,BALL |
| THSD | THREAD SERIES DESIGNATOR | UNF |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
