| Part Number : LAK1 2 | Manufacturer : Timken Corporation | ||
| NSN : 3130-00-081-9741 (3130000819741) | |||
| Item Name : Bearing Unit Ball | CAGE Code : 21335 | ||
| NIIN : 00-081-9741 (000819741) | |||
| FSC Code : 3130 Bearings Mounted | |||
| FSG Code : 31 Bearings | |||
| INC Code : 30556 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number LAK1 2, that of which is listed with the description Bearing Unit Ball; Manufactured by Timken Corporation and listed alongside the NSN 3130000819741, part number LAK1 2 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
|
2 mb distribution
CAGE Code: FAH01 |
14 dock drive inc
CAGE Code: 14677 |
|
1 nci j bkm mrk k ligi
CAGE Code: T0790 |
498 msug
CAGE Code: 5VW08 |
|
3m company communication markets
CAGE Code: 0VGY3 |
3m australia pty ltd
CAGE Code: Z0040,ZA992,ZD110,ZW687 |
|
1343080 alberta ltd
CAGE Code: L0796 |
3h industries inc
CAGE Code: 60754 |
|
3m purification pty limited
CAGE Code: Z5295 |
526th emxs fabrication
CAGE Code: 69XG4 |
|
2connect it b v
CAGE Code: HG221 |
3m canada inc
CAGE Code: 09581,0GSY9,L2266 |
|
3 wire group inc
CAGE Code: 4X0B1,7VME3 |
2h energy
CAGE Code: F1797 |
|
4fastplumber llc
CAGE Code: 4P0W6 |
| Part Number : LAK1 2 | Manufacturer : Timken Corporation | ||
| NSN Number : 3130-00-081-9741 (3130000819741) | |||
| Item Name : Bearing Unit Ball | CAGE Code : 21335 | ||
| NIIN : 000819741 | |||
| FSC CODE : 3130 Bearings Mounted | |||
Thank you for taking an interest in part number LAK1 2, that of which is listed with the description Bearing Unit Ball; Manufactured by Timken Corporation and listed alongside the NSN 3130000819741, part number LAK1 2 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3130-00-081-9741 Item PartTypeName: BEARING UNIT,BALL | 3130 | 000819741 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| LAK1/2 | 2 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABTD | MOUNTING SLOT WIDTH | 0.4375 INCHES NOMINAL |
| ABVG | MOUNTING SLOT LENGTH | 0.5625 INCHES NOMINAL |
| ABXV | BORE DIAMETER | 0.5000 INCHES NOMINAL |
| ACYB | BASE THICKNESS | 0.5000 INCHES NOMINAL |
| ADFX | CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG WIDTH | 3.5000 INCHES NOMINAL |
| AFWC | HOUSING HEIGHT | 2.1250 INCHES NOMINAL |
| AFWE | HOUSING WIDTH | 4.7500 INCHES NOMINAL |
| AGKL | LUBRICATION FITTING TYPE | PIPE PLUG |
| AGNF | BASE LENGTH | 1.3750 INCHES NOMINAL |
| AGYX | ROLLING ELEMENT GROOVE QUANTITY | 1 |
| AGZA | ALIGNMENT TYPE | SELF-ALIGNING |
| AGZH | INTERNAL FIT-UP DESIGNATION | STANDARD |
| AHZC | ASSEMBLY OVERALL LENGTH | 1.6094 INCHES NOMINAL |
| AKRF | SEAL TYPE | LABYRINTH |
| AMCL | BLOCK TYPE | FIXED |
| ANJS | SHAFT END TYPE | OPEN |
| ANKF | SEAL LOCATION | BOTH ENDS |
| ANKH | COLLAR LOCATION | ONE END |
| ANKK | LOAD CAPABILITY TYPE | RADIAL |
| ANKP | HEIGHT FROM BOTTOM OF BASE TO BORE CENTERLINE | 1.0625 INCHES NOMINAL |
| CBBL | FEATURES PROVIDED | GROUND ROLLING ELEMENT GROOVE |
| CWGR | LUBRICATION FITTING ANGLE FROM HORIZONTAL CENTERLINE | 90.0 DEGREES NOMINAL |
| CWGY | ROTATING ELEMENT LOCKING METHOD | SETSCREW LOCKING COLLAR |
| CWJW | MOUNTING HOLE TYPE | SLOTTED |
| LBMA | LUBRICATION MATERIAL | GREASE |
| MATT | MATERIAL | IRON CAST HOUSING |
| MATT | MATERIAL | STEEL SEAL |
| STYL | STYLE DESIGNATOR | PILLOW BLOCK,SOLID |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
