| Part Number : LAO-2 7 16 | Manufacturer : Timken Corporation | ||
| NSN : 3130-01-016-5632 (3130010165632) | |||
| Item Name : Bearing Unit Ball | CAGE Code : 21335 | ||
| NIIN : 01-016-5632 (010165632) | |||
| FSC Code : 3130 Bearings Mounted | |||
| FSG Code : 31 Bearings | |||
| INC Code : 30556 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: LAO2716 | |||
Thank you for taking an interest in part number LAO-2 7 16, that of which is listed with the description Bearing Unit Ball; Manufactured by Timken Corporation and listed alongside the NSN 3130010165632, part number LAO-2 7 16 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
|
LAO1 7 16
Timken Corporation NSN: 3130-00-142-0279 CAGE Code: 21335 |
LAO1 7 16FS160
Timken Corporation NSN: 3130-00-142-0279 CAGE Code: 21335 |
|
LAO1 3 16
Timken Corporation NSN: 3130-00-726-2415 CAGE Code: 21335 |
| Part Number : LAO-2 7 16 | Manufacturer : Timken Corporation | ||
| NSN Number : 3130-01-016-5632 (3130010165632) | |||
| Item Name : Bearing Unit Ball | CAGE Code : 21335 | ||
| NIIN : 010165632 | |||
| FSC CODE : 3130 Bearings Mounted | |||
Thank you for taking an interest in part number LAO-2 7 16, that of which is listed with the description Bearing Unit Ball; Manufactured by Timken Corporation and listed alongside the NSN 3130010165632, part number LAO-2 7 16 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| MRC | Criteria | Characteristic |
|---|---|---|
| ABTD | MOUNTING SLOT WIDTH | 0.8750 INCHES NOMINAL |
| ABVG | MOUNTING SLOT LENGTH | 1.1250 INCHES NOMINAL |
| ABXV | BORE DIAMETER | 2.4380 INCHES NOMINAL |
| ACYB | BASE THICKNESS | 1.5000 INCHES NOMINAL |
| ADFX | CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG WIDTH | 9.7500 INCHES NOMINAL |
| AFWC | HOUSING HEIGHT | 6.5310 INCHES NOMINAL |
| AFWD | HOUSING LENGTH | 2.1250 INCHES NOMINAL |
| AFWE | HOUSING WIDTH | 12.3120 INCHES NOMINAL |
| AGKL | LUBRICATION FITTING TYPE | PIPE PLUG |
| AGNF | BASE LENGTH | 2.1250 INCHES NOMINAL |
| AGYX | ROLLING ELEMENT GROOVE QUANTITY | 1 |
| AGZA | ALIGNMENT TYPE | SELF-ALIGNING |
| AGZH | INTERNAL FIT-UP DESIGNATION | STANDARD |
| AHZC | ASSEMBLY OVERALL LENGTH | 12.3120 INCHES NOMINAL |
| AKRF | SEAL TYPE | SELF-ALIGNING |
| AMCL | BLOCK TYPE | FIXED |
| ANJS | SHAFT END TYPE | OPEN |
| ANKF | SEAL LOCATION | ONE END |
| ANKK | LOAD CAPABILITY TYPE | RADIAL |
| ANKP | HEIGHT FROM BOTTOM OF BASE TO BORE CENTERLINE | 3.3120 INCHES NOMINAL |
| CBBL | FEATURES PROVIDED | GROUND ROLLING ELEMENT GROOVE |
| CWGR | LUBRICATION FITTING ANGLE FROM HORIZONTAL CENTERLINE | 0.0 DEGREES NOMINAL |
| CWGY | ROTATING ELEMENT LOCKING METHOD | DIRECT |
| CWJW | MOUNTING HOLE TYPE | SLOTTED |
| LBMA | LUBRICATION MATERIAL | GREASE |
| MATT | MATERIAL | STEEL OVERALL |
| STYL | STYLE DESIGNATOR | PILLOW BLOCK, SOLID |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
