| Part Number : RAKH1-7-16 | Manufacturer : Timken Corporation | ||
| NSN : 3130-01-017-6625 (3130010176625) | |||
| Item Name : Bearing Unit Ball | CAGE Code : 21335 | ||
| NIIN : 01-017-6625 (010176625) | |||
| FSC Code : 3130 Bearings Mounted | |||
| FSG Code : 31 Bearings | |||
| INC Code : 30556 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: RAKH1716 | |||
Thank you for taking an interest in part number RAKH1-7-16, that of which is listed with the description Bearing Unit Ball; Manufactured by Timken Corporation and listed alongside the NSN 3130010176625, part number RAKH1-7-16 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : RAKH1-7-16 | Manufacturer : Timken Corporation | ||
| NSN Number : 3130-01-017-6625 (3130010176625) | |||
| Item Name : Bearing Unit Ball | CAGE Code : 21335 | ||
| NIIN : 010176625 | |||
| FSC CODE : 3130 Bearings Mounted | |||
Thank you for taking an interest in part number RAKH1-7-16, that of which is listed with the description Bearing Unit Ball; Manufactured by Timken Corporation and listed alongside the NSN 3130010176625, part number RAKH1-7-16 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3130-01-017-6625 Item PartTypeName: BEARING UNIT,BALL | 3130 | 010176625 | N | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | ||||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| MPD23-1 | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABJH | TEMP RATING | 121.0 DEG CELSIUS |
| ABTB | MOUNTING HOLE DIAMETER | 1.1880 INCHES NOMINAL |
| ABXV | BORE DIAMETER | 1.4380 INCHES NOMINAL |
| ACYB | BASE THICKNESS | 0.7500 INCHES NOMINAL |
| ADFX | CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG WIDTH | 5.6880 INCHES NOMINAL |
| AFWC | HOUSING HEIGHT | 4.1880 INCHES NOMINAL |
| AFWD | HOUSING LENGTH | 1.9380 INCHES NOMINAL |
| AFWE | HOUSING WIDTH | 4.1880 INCHES NOMINAL |
| AGKL | LUBRICATION FITTING TYPE | HYDRAULIC |
| AGNF | BASE LENGTH | 8.0000 INCHES NOMINAL |
| AGYX | ROLLING ELEMENT GROOVE QUANTITY | 1 |
| AGZA | ALIGNMENT TYPE | RIGID |
| AGZH | INTERNAL FIT-UP DESIGNATION | LOOSE |
| AHZC | ASSEMBLY OVERALL LENGTH | 3.1496 INCHES NOMINAL |
| AKRF | SEAL TYPE | LABYRINTH |
| AMCL | BLOCK TYPE | FIXED |
| ANJS | SHAFT END TYPE | OPEN |
| ANKF | SEAL LOCATION | BOTH ENDS |
| ANKH | COLLAR LOCATION | BOTH ENDS |
| ANKK | LOAD CAPABILITY TYPE | RADIAL AND THRUST |
| ANKP | HEIGHT FROM BOTTOM OF BASE TO BORE CENTERLINE | 2.1250 INCHES NOMINAL |
| CBBL | FEATURES PROVIDED | GROUND ROLLING ELEMENT GROOVE |
| CWGR | LUBRICATION FITTING ANGLE FROM HORIZONTAL CENTERLINE | 90.0 DEGREES NOMINAL |
| CWGY | ROTATING ELEMENT LOCKING METHOD | SETSCREW LOCKING COLLAR |
| LBMA | LUBRICATION MATERIAL | GREASE |
| MATT | MATERIAL | STEEL OVERALL |
| STYL | STYLE DESIGNATOR | PILLOW BLOCK,SOLID |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
