| Part Number : RCJC 1 1 2 | Manufacturer : Timken Corporation | ||
| NSN : 3130-01-251-1010 (3130012511010) | |||
| Item Name : Bearing Unit Ball | CAGE Code : 21335 | ||
| NIIN : 01-251-1010 (012511010) | |||
| FSC Code : 3130 Bearings Mounted | |||
| FSG Code : 31 Bearings | |||
| INC Code : 30556 | |||
| NCB Code : 01 | Country : USA | ||
Thank you for taking an interest in part number RCJC 1 1 2, that of which is listed with the description Bearing Unit Ball; Manufactured by Timken Corporation and listed alongside the NSN 3130012511010, part number RCJC 1 1 2 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : RCJC 1 1 2 | Manufacturer : Timken Corporation | ||
| NSN Number : 3130-01-251-1010 (3130012511010) | |||
| Item Name : Bearing Unit Ball | CAGE Code : 21335 | ||
| NIIN : 012511010 | |||
| FSC CODE : 3130 Bearings Mounted | |||
Thank you for taking an interest in part number RCJC 1 1 2, that of which is listed with the description Bearing Unit Ball; Manufactured by Timken Corporation and listed alongside the NSN 3130012511010, part number RCJC 1 1 2 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| MRC | Criteria | Characteristic |
|---|---|---|
| AFWE | Housing Width | 5.125 INCHES NOMINAL |
| STYL | Style Designator | FLANGE BLOCK |
| ABTB | Mounting Hole Diameter | 0.516 INCHES NOMINAL |
| CWJW | Mounting Hole Type | ROUND, UNTHREADED |
| AHZC | Assembly Overall Length | 2.016 INCHES NOMINAL |
| MATT | Material | RUBBER SYNTHETIC SEAL |
| AKRF | Seal Type | CONTACT |
| AGKL | Lubrication Fitting Type | PIPE PLUG |
| CBBL | Features Provided | GROUND ROLLING ELEMENT GROOVE |
| ANKK | Load Capability Type | RADIAL |
| ANJS | Shaft End Type | OPEN |
| ANKH | Collar Location | ONE END |
| AGZA | Alignment Type | SELF-ALIGNING |
| MATT | Material | STEEL ALIGNING RING |
| AGYX | Rolling Element Groove Quantity | 1 |
| LMDC | Lubrication Material Document And Classification | MIL-G-81322 MIL SPEC SINGLE MATERIAL RESPONSE |
| ANKF | Seal Location | BOTH ENDS |
| CWGY | Rotating Element Locking Method | SETSCREW LOCKING COLLAR |
| SUPP | Supplementary Features | POWER TRANSMISSION APPL; FLANGE CARTRIDGE CONCENTRIC COLLAR INSERT RELUBRICABLE DESIGN |
| ABXV | Bore Diameter | 1.5000 INCHES MINIMUM AND 1.5005 INCHES MAXIMUM |
| AGZH | Internal Fit-Up Designation | STANDARD |
| AMCL | Block Type | FIXED |
| LBMA | Lubrication Material | GREASE |
| ABKU | Flange Thickness | 0.688 INCHES NOMINAL |
| CWGR | Lubrication Fitting Angle From Horizontal Centerline | 0.0 DEGREES NOMINAL |
| MATT | Material | IRON HOUSING |
| AFWD | Housing Length | 1.594 INCHES NOMINAL |
| CXCX | Center To Center Distance Between Mounting Holes Along Side Of A Square | 4.000 INCHES NOMINAL |
| MRC | Decoded Requirement | Clear Text Reply |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
