| Part Number : RCJ1 | Manufacturer : Timken Corporation | ||
| NSN : 3130-01-266-2615 (3130012662615) | |||
| Item Name : Bearing Unit Ball | CAGE Code : 21335 | ||
| NIIN : 01-266-2615 (012662615) | |||
| FSC Code : 3130 Bearings Mounted | |||
| FSG Code : 31 Bearings | |||
| INC Code : 30556 | |||
| NCB Code : 01 | Country : USA | ||
Thank you for taking an interest in part number RCJ1, that of which is listed with the description Bearing Unit Ball; Manufactured by Timken Corporation and listed alongside the NSN 3130012662615, part number RCJ1 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : RCJ1 | Manufacturer : Timken Corporation | ||
| NSN Number : 3130-01-266-2615 (3130012662615) | |||
| Item Name : Bearing Unit Ball | CAGE Code : 21335 | ||
| NIIN : 012662615 | |||
| FSC CODE : 3130 Bearings Mounted | |||
Thank you for taking an interest in part number RCJ1, that of which is listed with the description Bearing Unit Ball; Manufactured by Timken Corporation and listed alongside the NSN 3130012662615, part number RCJ1 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3130-01-266-2615 Item PartTypeName: BEARING UNIT,BALL | 3130 | 012662615 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 309-1231-010 | 5 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABKU | FLANGE THICKNESS | 0.562 INCHES NOMINAL |
| ABTB | MOUNTING HOLE DIAMETER | 0.453 INCHES NOMINAL |
| ABXV | BORE DIAMETER | 1.0000 INCHES MINIMUM AND 1.0005 INCHES MAXIMUM |
| AFWD | HOUSING LENGTH | 1.312 INCHES NOMINAL |
| AFWE | HOUSING WIDTH | 3.750 INCHES NOMINAL |
| AGKL | LUBRICATION FITTING TYPE | PIPE PLUG |
| AGYX | ROLLING ELEMENT GROOVE QUANTITY | 1 |
| AGZA | ALIGNMENT TYPE | SELF-ALIGNING |
| AGZH | INTERNAL FIT-UP DESIGNATION | STANDARD |
| AHZC | ASSEMBLY OVERALL LENGTH | 1.422 INCHES NOMINAL |
| AKRF | SEAL TYPE | CONTACT |
| AMCL | BLOCK TYPE | FIXED |
| ANJS | SHAFT END TYPE | OPEN |
| ANKF | SEAL LOCATION | BOTH ENDS |
| ANKH | COLLAR LOCATION | ONE END |
| ANKK | LOAD CAPABILITY TYPE | RADIAL AND THRUST |
| CWGR | LUBRICATION FITTING ANGLE FROM HORIZONTAL CENTERLINE | 45.0 DEGREES NOMINAL |
| CWGY | ROTATING ELEMENT LOCKING METHOD | ECCENTRIC CAM LOCKING COLLAR |
| CWJW | MOUNTING HOLE TYPE | ROUND,UNTHREADED |
| CXCX | CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG SIDE OF A SQUARE | 2.750 INCHES NOMINAL |
| LBMA | LUBRICATION MATERIAL | GREASE |
| MATT | MATERIAL | IRON CAST HOUSING |
| MATT | MATERIAL | RUBBER SYNTHETIC SEAL |
| MATT | MATERIAL | STEEL COLLAR |
| MATT | MATERIAL | STEEL COMP E52100 BEARING |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | SAE ASSN STD SINGLE MATERIAL RESPONSE BEARING |
| STYL | STYLE DESIGNATOR | FLANGE BLOCK |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
