| Part Number : RAK2 | Manufacturer : Timken Corporation | ||
| NSN : 3130-01-393-9146 (3130013939146) | |||
| Item Name : Bearing Unit Ball | CAGE Code : 21335 | ||
| NIIN : 01-393-9146 (013939146) | |||
| FSC Code : 3130 Bearings Mounted | |||
| FSG Code : 31 Bearings | |||
| INC Code : 30556 | |||
| NCB Code : 01 | Country : USA | ||
Thank you for taking an interest in part number RAK2, that of which is listed with the description Bearing Unit Ball; Manufactured by Timken Corporation and listed alongside the NSN 3130013939146, part number RAK2 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : RAK2 | Manufacturer : Timken Corporation | ||
| NSN Number : 3130-01-393-9146 (3130013939146) | |||
| Item Name : Bearing Unit Ball | CAGE Code : 21335 | ||
| NIIN : 013939146 | |||
| FSC CODE : 3130 Bearings Mounted | |||
Thank you for taking an interest in part number RAK2, that of which is listed with the description Bearing Unit Ball; Manufactured by Timken Corporation and listed alongside the NSN 3130013939146, part number RAK2 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3130-01-393-9146 Item PartTypeName: BEARING UNIT,BALL | 3130 | 013939146 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| RAK2 | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABTD | MOUNTING SLOT WIDTH | 0.7188 INCHES NOMINAL |
| ABVG | MOUNTING SLOT LENGTH | 0.4688 INCHES NOMINAL |
| ABXV | BORE DIAMETER | 2.0000 INCHES NOMINAL |
| ACYB | BASE THICKNESS | 0.750 INCHES NOMINAL |
| ADFX | CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG WIDTH | 6.9375 INCHES NOMINAL |
| AFWC | HOUSING HEIGHT | 4.9062 INCHES NOMINAL |
| AFWE | HOUSING WIDTH | 8.750 INCHES NOMINAL |
| AGKL | LUBRICATION FITTING TYPE | PIPE PLUG |
| AGNF | BASE LENGTH | 2.3125 INCHES NOMINAL |
| AGYX | ROLLING ELEMENT GROOVE QUANTITY | 1 |
| AGZA | ALIGNMENT TYPE | SELF-ALIGNING |
| AGZH | INTERNAL FIT-UP DESIGNATION | STANDARD |
| AHZC | ASSEMBLY OVERALL LENGTH | 2.8125 INCHES NOMINAL |
| AKRF | SEAL TYPE | LABYRINTH |
| AMCL | BLOCK TYPE | FIXED |
| ANJS | SHAFT END TYPE | OPEN |
| ANKF | SEAL LOCATION | BOTH ENDS |
| ANKH | COLLAR LOCATION | ONE END |
| ANKK | LOAD CAPABILITY TYPE | RADIAL |
| ANKP | HEIGHT FROM BOTTOM OF BASE TO BORE CENTERLINE | 2.4375 INCHES NOMINAL |
| CWGR | LUBRICATION FITTING ANGLE FROM HORIZONTAL CENTERLINE | 90.0 DEGREES NOMINAL |
| CWGY | ROTATING ELEMENT LOCKING METHOD | ECCENTRIC CAM LOCKING COLLAR |
| CWJW | MOUNTING HOLE TYPE | SLOTTED |
| LBMA | LUBRICATION MATERIAL | GREASE |
| MATT | MATERIAL | IRON CAST HOUSING |
| MATT | MATERIAL | RUBBER SYNTHETIC SEAL AND STEEL SEAL |
| STYL | STYLE DESIGNATOR | PILLOW BLOCK, SOLID |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
