| Part Number : MKP2185 A1173 | Manufacturer : Timken Corporation | ||
| NSN : 5340-01-165-7717 (5340011657717) | |||
| Item Name : Clamp Loop | CAGE Code : 21335 | ||
| NIIN : 01-165-7717 (011657717) | |||
| FSC Code : 5340 Hardware Commercial | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 17532 | |||
| NCB Code : 01 | Country : USA | ||
Thank you for taking an interest in part number MKP2185 A1173, that of which is listed with the description Clamp Loop; Manufactured by Timken Corporation and listed alongside the NSN 5340011657717, part number MKP2185 A1173 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : MKP2185 A1173 | Manufacturer : Timken Corporation | ||
| NSN Number : 5340-01-165-7717 (5340011657717) | |||
| Item Name : Clamp Loop | CAGE Code : 21335 | ||
| NIIN : 011657717 | |||
| FSC CODE : 5340 Hardware Commercial | |||
Thank you for taking an interest in part number MKP2185 A1173, that of which is listed with the description Clamp Loop; Manufactured by Timken Corporation and listed alongside the NSN 5340011657717, part number MKP2185 A1173 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5340-01-165-7717 Item PartTypeName: CLAMP,LOOP | 5340 | 011657717 | U | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| SS7563-6NBCL | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAAL | TONGUE HOLE TYPE | ROUND,UNTHREADED |
| AAAP | CUSHIONING ENVIRONMENTAL PROTECTION | FUEL RESISTANT OR HYDRAULIC FLUID |
| ABMK | OVERALL WIDTH | 0.500 INCHES NOMINAL |
| ABMZ | DIAMETER | 0.194 INCHES MINIMUM AND 0.209 INCHES MAXIMUM |
| ABPX | MATERIAL THICKNESS | 0.018 INCHES MINIMUM AND 0.022 INCHES MAXIMUM |
| AXWJ | FASTENING DEVICE TYPE | LOCK TAB |
| AZCY | CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE | 0.577 INCHES MINIMUM AND 0.607 INCHES MAXIMUM |
| AZDC | DISTANCE FROM LOOP CENTER TO TONGUE END | 0.810 INCHES NOMINAL |
| BZTN | LOOP INSIDE DIAMETER | 0.375 INCHES NOMINAL |
| FEAT | SPECIAL FEATURES | CUSHION ALSO OZONE RESISTANT; COLOR YELLOW |
| MATT | MATERIAL | RUBBER BUTADIENE NITRILE CUSHION |
| MATT | MATERIAL | STEEL COMP 631 BAND |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-25043 MIL SPEC SINGLE MATERIAL RESPONSE BAND |
| SFTT | SURFACE TREATMENT | PASSIVATE BAND |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE BAND |
| STYL | STYLE DESIGNATOR | OFFSET MOUNT |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
