| Part Number : 01-435-0027-5PC58 | Manufacturer : Timken Gears And Services Inc | ||
| NSN : 3020-00-606-0880 (3020006060880) | |||
| Item Name : Gear Worm | CAGE Code : 17454 | ||
| NIIN : 00-606-0880 (006060880) | |||
| FSC Code : 3020 Gears Pulleys Sprockets and Transmission Chain | |||
| FSG Code : 30 Mechanical Power Transmission Equipment | |||
| INC Code : 05467 | |||
| NCB Code : 00 | Country : USA | ||
| Alternate P/N: 0143500275PC58 | |||
Thank you for taking an interest in part number 01-435-0027-5PC58, that of which is listed with the description Gear Worm; Manufactured by Timken Gears And Services Inc and listed alongside the NSN 3020006060880, part number 01-435-0027-5PC58 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 01-435-0027-5PC58 | Manufacturer : Timken Gears And Services Inc | ||
| NSN Number : 3020-00-606-0880 (3020006060880) | |||
| Item Name : Gear Worm | CAGE Code : 17454 | ||
| NIIN : 006060880 | |||
| FSC CODE : 3020 Gears Pulleys Sprockets and Transmission Chain | |||
Thank you for taking an interest in part number 01-435-0027-5PC58, that of which is listed with the description Gear Worm; Manufactured by Timken Gears And Services Inc and listed alongside the NSN 3020006060880, part number 01-435-0027-5PC58 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3020-00-606-0880 Item PartTypeName: GEAR,WORM | 3020 | 006060880 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 60-400-0009-2 | C | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AGJS | PITCH DIAMETER | 3.0000 INCHES NOMINAL |
| ALPN | FACE TYPE | CONCAVE |
| ANTP | BORE STYLE | W/ KEYWAY BOTH ENDS |
| CWCD | NOMINAL OUTSIDE DIAMETER | 3.443 INCHES |
| CWNW | MATING PITCH DIAMETER | 0.7500 INCHES NOMINAL |
| CWPC | THREAD FORM QUANTITY | 1 |
| CWPH | THREAD FORM DIRECTION | LEFT-HAND |
| CWPP | PRESSURE ANGLE | 14.5000 DEGREES |
| CWPZ | HELIX ANGLE | 9.0000 DEGREES |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 5.254 INCHES FIRST END |
| CWRM | FACE NOMINAL WIDTH | 3.830 INCHES |
| CWRS | BORE NOMINAL DIAMETER | 1.500 INCHES BOTH ENDS |
| CWSN | KEYWAY NOMINAL WIDTH | 0.125 INCHES BOTH ENDS |
| CWSR | NOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM | 0.815 INCHES BOTH ENDS |
| CWTR | HUB STYLE DESIGNATOR | THREADED FIRST END |
| FEAT | SPECIAL FEATURES | 1.765 IN.OD,0.867 IN.DEEP COUNTERBORE SECOND END |
| MATT | MATERIAL | STEEL COMP 4620 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-624 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| STYL | STYLE DESIGNATOR | PROTRUDING HUB |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
