| Part Number : 09A121-2 | Manufacturer : Transdigm Group Inc | ||
| NSN : 5340-01-348-8622 (5340013488622) | |||
| Item Name : Clamp Block | CAGE Code : 83930 | ||
| NIIN : 01-348-8622 (013488622) | |||
| FSC Code : 5340 Hardware Commercial | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 37415 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: 09A1212 | |||
Thank you for taking an interest in part number 09A121-2, that of which is listed with the description Clamp Block; Manufactured by Transdigm Group Inc and listed alongside the NSN 5340013488622, part number 09A121-2 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 09A121-2 | Manufacturer : Transdigm Group Inc | ||
| NSN Number : 5340-01-348-8622 (5340013488622) | |||
| Item Name : Clamp Block | CAGE Code : 83930 | ||
| NIIN : 013488622 | |||
| FSC CODE : 5340 Hardware Commercial | |||
Thank you for taking an interest in part number 09A121-2, that of which is listed with the description Clamp Block; Manufactured by Transdigm Group Inc and listed alongside the NSN 5340013488622, part number 09A121-2 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5340-01-348-8622 Item PartTypeName: CLAMP,BLOCK | 5340 | 013488622 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 09A121-2 | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABMK | OVERALL WIDTH | 0.500 INCHES NOMINAL |
| ABTJ | MOUNTING HOLE QUANTITY | 2 |
| AXPC | CENTER TO CENTER DISTANCE BETWEEN FIRST AND SECOND MOUNTING HOLES | 3.630 INCHES NOMINAL |
| AZGM | MOUNTING FACILITY | UNTHREADED HOLE |
| BYGG | BLOCK HEIGHT | 0.690 INCHES NOMINAL |
| CWWM | CLAMPING HOLE DIAMETER | 0.375 INCHES NOMINAL FIRST HOLE0.875 INCHES NOMINAL SECOND HOLE0.875 INCHES NOMINAL THIRD HOLE |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-C-85052 MIL SPEC SINGLE MATERIAL RESPONSE OR MIL-C-85449 MIL SPEC SINGLE MATERIAL RESPONSE |
| STYL | STYLE DESIGNATOR | RECTANGULAR |
| ABHP | OVERALL LENGTH | 4.250 INCHES NOMINAL |
| ABKW | OVERALL HEIGHT | 1.380 INCHES NOMINAL |
| ABTB | MOUNTING HOLE DIAMETER | 0.322 INCHES NOMINAL |
| AFEC | DISTANCE FROM CENTER OF MOUNTING HOLE TO EDGE ALONG THE WIDTH | 0.250 INCHES NOMINAL |
| CWTD | CLAMPING HOLE QUANTITY | 3 |
| MATT | MATERIAL | RUBBER BUTADIENE NITRILE |
| CWXN | DISTANCE FROM END TO FIRST CLAMPING HOLE CENTER | 1.000 INCHES NOMINAL |
| CWXZ | CENTER TO CENTER DISTANCE BETWEEN FIRST AND SECOND CLAMPING HOLES | 1.380 INCHES NOMINAL |
| CWXC | DISTANCE FROM END TO FIRST MOUNTING HOLE CENTER | 0.310 INCHES NOMINAL |
| CWYC | CENTER TO CENTER DISTANCE BETWEEN FIRST AND THIRD CLAMPING HOLES | 2.500 INCHES NOMINAL |
| FEAT | SPECIAL FEATURES | INCL 2 SPACER SLEEVES AND 1 CHANNEL |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
