| Part Number : ST9M580C1L | Manufacturer : Trico Manufacturing Inc | ||
| NSN : 5340-01-102-8508 (5340011028508) | |||
| Item Name : Bracket Angle | CAGE Code : 59570 | ||
| NIIN : 01-102-8508 (011028508) | |||
| FSC Code : 5340 Hardware Commercial | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 16900 | |||
| NCB Code : 01 | Country : USA | ||
Thank you for taking an interest in part number ST9M580C1L, that of which is listed with the description Bracket Angle; Manufactured by Trico Manufacturing Inc and listed alongside the NSN 5340011028508, part number ST9M580C1L is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
|
4m sigma corporation
CAGE Code: 0BC31 |
1064100 alberta ltd
CAGE Code: L0C80 |
|
5dt inc
CAGE Code: 3BPF1 |
259 holdings ltd
CAGE Code: 431P3 |
|
0mcc inc
CAGE Code: 12156 |
20 10 products inc
CAGE Code: 09KC9 |
|
21st century enterprises inc
CAGE Code: 56589 |
3m nederland b v
CAGE Code: H1248 |
|
498 msug
CAGE Code: 5VW08 |
400hz repair
CAGE Code: 03MS6 |
|
3m co engineering document systems
CAGE Code: 1BY21 |
1st american metals inc
CAGE Code: 0MP49 |
|
2001 micro systemation ab
CAGE Code: SK396 |
2is inc
CAGE Code: 1ZKD0 |
|
3m norge a s
CAGE Code: N0447 |
| Part Number : ST9M580C1L | Manufacturer : Trico Manufacturing Inc | ||
| NSN Number : 5340-01-102-8508 (5340011028508) | |||
| Item Name : Bracket Angle | CAGE Code : 59570 | ||
| NIIN : 011028508 | |||
| FSC CODE : 5340 Hardware Commercial | |||
Thank you for taking an interest in part number ST9M580C1L, that of which is listed with the description Bracket Angle; Manufactured by Trico Manufacturing Inc and listed alongside the NSN 5340011028508, part number ST9M580C1L is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5340-01-102-8508 Item PartTypeName: BRACKET,ANGLE | 5340 | 011028508 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| ST9M580AC1L | 2 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ADLK | FIRST LEG LENGTH | 0.750 INCHES NOMINAL |
| ADLL | SECOND LEG LENGTH | 0.750 INCHES NOMINAL |
| AHLF | SECOND LEG WIDTH | 0.980 INCHES MINIMUM AND 1.020 INCHES MAXIMUM |
| AHLG | SECOND LEG CORNER RADIUS | 0.220 INCHES MINIMUM AND 0.280 INCHES MAXIMUM |
| AHLK | FIRST LEG HOLE DIAMETER | 0.129 INCHES MINIMUM AND 0.134 INCHES MAXIMUM |
| AHLN | SECOND LEG HOLE DIAMETER | 0.220 INCHES MINIMUM AND 0.230 INCHES MAXIMUM |
| AHLV | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.230 INCHES MINIMUM AND 0.250 INCHES MAXIMUM |
| AHLW | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.220 INCHES MINIMUM AND 0.280 INCHES MAXIMUM |
| AHPW | FIRST LEG THICKNESS | 0.050 INCHES NOMINAL |
| AHPX | SECOND LEG THICKNESS | 0.050 INCHES NOMINAL |
| AHQN | FIRST LEG WIDTH | 0.980 INCHES MINIMUM AND 1.020 INCHES MAXIMUM |
| AHQP | FIRST LEG CORNER RADIUS | 0.220 INCHES MINIMUM AND 0.280 INCHES MAXIMUM |
| AHQU | FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM |
| AHRA | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM |
| AHRB | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.220 INCHES MINIMUM AND 0.280 INCHES MAXIMUM |
| AJZU | FIRST LEG STYLE | CORNER RADIUS |
| AKAU | FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| AKBU | SECOND LEG STYLE | CORNER RADIUS |
| AKCU | SECOND LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| CSSP | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| CSSQ | FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| MATT | MATERIAL | ALUMINUM ALLOY 2024 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/5,T81 FED SPEC SINGLE MATERIAL RESPONSE |
| SFTT | SURFACE TREATMENT | PAINT |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-P-23377 MIL SPEC SINGLE TREATMENT RESPONSE |
| STYL | STYLE DESIGNATOR | ANGLE |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
