| Part Number : 10174025-007 | Manufacturer : Trw Limited | ||
| NSN : 5905-01-493-7855 (5905014937855) | |||
| Item Name : Resistor Variable Wire Wound Non | CAGE Code : 75042 | ||
| NIIN : 01-493-7855 (014937855) | |||
| FSC Code : 5905 Resistors | |||
| FSG Code : 59 Electrical and Electronic Equipment Components | |||
| INC Code : 37406 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: 10174025007 | |||
Thank you for taking an interest in part number 10174025-007, that of which is listed with the description Resistor Variable Wire Wound Non; Manufactured by Trw Limited and listed alongside the NSN 5905014937855, part number 10174025-007 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 10174025-007 | Manufacturer : Trw Limited | ||
| NSN Number : 5905-01-493-7855 (5905014937855) | |||
| Item Name : Resistor Variable Wire Wound Non | CAGE Code : 75042 | ||
| NIIN : 014937855 | |||
| FSC CODE : 5905 Resistors | |||
Thank you for taking an interest in part number 10174025-007, that of which is listed with the description Resistor Variable Wire Wound Non; Manufactured by Trw Limited and listed alongside the NSN 5905014937855, part number 10174025-007 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-01-493-7855 Item PartTypeName: RESISTOR,VARIABLE,WIRE WOUND,NON | 5905 | 014937855 | 0 | N | A | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | A | 0 | |||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 1081H38PC22 | 3 | 8 | E |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABXF | Shaft Length | 0.080 INCHES MAXIMUM |
| AKPV | Mounting Facility Quantity | 2 |
| ADAU | Body Height | 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM |
| AEFL | Maximum Running Torque | 5.00 INCH-OUNCES |
| AAPN | Section Quantity | 1 |
| TTQY | Terminal Type And Quantity | 3 PIN |
| AEFD | Actuator Type | SINGLE SHAFT |
| MRC | Decoded Requirement | Clear Text Reply |
| CQGN | Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power | 150.0 SINGLE SECTION |
| APXH | Terminal Location | LOWER ADJACENT SIDE SINGLE ROW |
| CRGD | Power Dissipation Rating Per Section In Watts | 0.75 FREE AIR SINGLE SECTION |
| AEDX | Shaft Style | ROUND, SLOTTED |
| ABTB | Mounting Hole Diameter | 0.073 INCHES NOMINAL |
| AEHT | Center To Center Distance Between Terminals | 0.100 INCHES NOMINAL |
| AGTP | Lateral Distance Between Mounting Hole Centers | 0.100 INCHES NOMINAL |
| ABWV | Shaft Diameter | 0.050 INCHES MINIMUM AND 0.750 INCHES MAXIMUM |
| ABJT | Terminal Length | 0.172 INCHES MINIMUM |
| AXGY | Mounting Method | UNTHREADED HOLE AND TERMINAL |
| CRFJ | Temp Coefficient Of Resistance Per Section In Ppm Per Deg Celsius | -50.0 TO 50.0 SINGLE SECTION |
| TEST | Test Data Document | 81349-MIL-PRF-39015 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| AARG | Reliability Indicator | ESTABLISHED |
| AAQL | Body Style | RECTANGULAR W/MOUNTING HOLES |
| AARH | Reliability Failure Rate Level In Percent | 1 |
| ADAT | Body Width | 0.180 INCHES MINIMUM AND 0.230 INCHES MAXIMUM |
| CQCC | Electrical Resistance Per Section | 5.000 KILOHMS SINGLE SECTION |
| ADAQ | Body Length | 0.490 INCHES MINIMUM AND 0.540 INCHES MAXIMUM |
| CRSS | Resistance Tolerance Per Section In Percent | -5.0 TO 5.0 SINGLE SECTION |
| ZZZK | Specification/Standard Data | 81349-MIL-PRF-39015/2 GOVERNMENT SPECIFICATION |
| CSDH | Ambient Temp In Deg Celsius Per Section At Full Rated Power | 85.0 SINGLE SECTION |
| CQCM | Center To Center Distance Between Center Terminal And Outside Terminal | 0.100 INCHES NOMINAL |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
