| Part Number : 645795 | Manufacturer : Turbo Power And Marine System Inc | ||
| NSN : 5305-00-124-9772 (5305001249772) | |||
| Item Name : Screw Machine | CAGE Code : 11449 | ||
| NIIN : 00-124-9772 (001249772) | |||
| FSC Code : 5305 Screws | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 06657 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number 645795, that of which is listed with the description Screw Machine; Manufactured by Turbo Power And Marine System Inc and listed alongside the NSN 5305001249772, part number 645795 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 645795 | Manufacturer : Turbo Power And Marine System Inc | ||
| NSN Number : 5305-00-124-9772 (5305001249772) | |||
| Item Name : Screw Machine | CAGE Code : 11449 | ||
| NIIN : 001249772 | |||
| FSC CODE : 5305 Screws | |||
Thank you for taking an interest in part number 645795, that of which is listed with the description Screw Machine; Manufactured by Turbo Power And Marine System Inc and listed alongside the NSN 5305001249772, part number 645795 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-00-124-9772 Item PartTypeName: SCREW,MACHINE | 5305 | 001249772 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 645795 | 2 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.298 INCHES MINIMUM AND 0.370 INCHES MAXIMUM |
| AASB | FASTENER LENGTH | 0.440 INCHES MINIMUM AND 0.450 INCHES MAXIMUM |
| AASK | HEAD STYLE | FLAT COUNTERSUNK |
| AASL | HEAD DIAMETER | 0.322 INCHES MINIMUM AND 0.385 INCHES MAXIMUM |
| ABQZ | INTERNAL DRIVE STYLE | TORQUE SET |
| AGAV | END ITEM IDENTIFICATION | YENGINE,AIRCRAFT,F100-PW-100;ENGINE,AIRCRAFT,F100-PW-200;ENGINE,AIRCRAFT,F100 PW220;ENGINE,AIRCRAFT F-117,PW-100;AIRCRAFT,F-111 (FMS ONLY);AIRCRAFT,EAGLE F-15;F-16 AIRCRAFT;ADVANCED AIR TRAFFIC CONTROL;C-5 SUPPORT EQUIPMENT |
| AHYM | NOMINAL THREAD DIAMETER | 0.190 INCHES |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQBC | MINIMUM TENSILE STRENGTH | 130000 POUNDS PER SQUARE INCH |
| CQFM | HARDNESS RATING | 248.0 BRINELL STANDARD MINIMUM AND 341.0 BRINELL STANDARD MAXIMUM |
| CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| CYAU | SCREW MATERIAL | IRON ALLOY 660 |
| CYAW | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5731 ASSN STD SINGLE MATERIAL RESPONSE |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
