| Part Number : 517122 | Manufacturer : Turbo Power And Marine System Inc | ||
| NSN : 5307-00-942-5579 (5307009425579) | |||
| Item Name : Stud Recessed And Stepped | CAGE Code : 11449 | ||
| NIIN : 00-942-5579 (009425579) | |||
| FSC Code : 5307 Studs | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 15943 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number 517122, that of which is listed with the description Stud Recessed And Stepped; Manufactured by Turbo Power And Marine System Inc and listed alongside the NSN 5307009425579, part number 517122 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 517122 | Manufacturer : Turbo Power And Marine System Inc | ||
| NSN Number : 5307-00-942-5579 (5307009425579) | |||
| Item Name : Stud Recessed And Stepped | CAGE Code : 11449 | ||
| NIIN : 009425579 | |||
| FSC CODE : 5307 Studs | |||
Thank you for taking an interest in part number 517122, that of which is listed with the description Stud Recessed And Stepped; Manufactured by Turbo Power And Marine System Inc and listed alongside the NSN 5307009425579, part number 517122 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5307-00-942-5579 Item PartTypeName: STUD,RECESSED AND STEPPED | 5307 | 009425579 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 517122 | 6 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3A NUT THREAD |
| AAJD | THREAD CLASS | 3A STUD THREAD |
| AAJF | THREAD DIRECTION | RIGHT-HAND NUT THREAD |
| AAJF | THREAD DIRECTION | RIGHT-HAND STUD THREAD |
| AASA | THREAD LENGTH | 1.000 INCHES MINIMUM NUT THREAD AND 1.100 INCHES MAXIMUM NUT THREAD |
| AASA | THREAD LENGTH | 1.000 INCHES MINIMUM STUD THREAD AND 1.100 INCHES MAXIMUM STUD THREAD |
| ABHP | OVERALL LENGTH | 9.020 INCHES MINIMUM AND 9.080 INCHES MAXIMUM |
| ADCZ | LENGTH OF RECESSED PORTION OF SHANK | 0.290 INCHES MINIMUM AND 0.310 INCHES MAXIMUM |
| ADDA | DIAMETER OF RECESSED PORTION OF SHANK | 0.240 INCHES MINIMUM AND 0.252 INCHES MAXIMUM |
| ADDU | DISTANCE FROM COTTER PIN HOLE CENTERLINE TO NUT END | 0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM FIRST HOLE |
| ADDV | COTTER PIN HOLE DIAMETER | 0.062 INCHES MINIMUM AND 0.075 INCHES MAXIMUM FIRST HOLE |
| CMLP | THREAD QUANTITY PER INCH | 24 STUD THREAD |
| CQJX | NOMINAL THREAD SIZE | 0.312 INCHES STUD THREAD |
| FEAT | SPECIAL FEATURES | RECESSED AT BOTH ENDS OF SHANK |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AISI310 ASSN STD 1ST MATERIAL RESPONSE AND AMS5613 ASSN STD 2ND MATERIAL RESPONSE AND MS7470 MIL SPEC SINGLE MATERIAL RESPONSE |
| STYL | STYLE DESIGNATOR | RECESSED AND STEPPED |
| THSD | THREAD SERIES DESIGNATOR | UNF STUD THREAD |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
