| Part Number : 566625 | Manufacturer : Turbo Power And Marine System Inc | ||
| NSN : 5315-00-866-0765 (5315008660765) | |||
| Item Name : Pin Grooved Headed | CAGE Code : 11449 | ||
| NIIN : 00-866-0765 (008660765) | |||
| FSC Code : 5315 Nails Machine Keys and Pins | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 02382 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number 566625, that of which is listed with the description Pin Grooved Headed; Manufactured by Turbo Power And Marine System Inc and listed alongside the NSN 5315008660765, part number 566625 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 566625 | Manufacturer : Turbo Power And Marine System Inc | ||
| NSN Number : 5315-00-866-0765 (5315008660765) | |||
| Item Name : Pin Grooved Headed | CAGE Code : 11449 | ||
| NIIN : 008660765 | |||
| FSC CODE : 5315 Nails Machine Keys and Pins | |||
Thank you for taking an interest in part number 566625, that of which is listed with the description Pin Grooved Headed; Manufactured by Turbo Power And Marine System Inc and listed alongside the NSN 5315008660765, part number 566625 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5315-00-866-0765 Item PartTypeName: PIN,GROOVED,HEADED | 5315 | 008660765 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 566625 | 6 | 9 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAGZ | FIRST END STYLE | CHAMFERED |
| AASK | HEAD STYLE | FLAT FILLISTER |
| ABMZ | DIAMETER | 0.2475 INCHES MINIMUM AND 0.2485 INCHES MAXIMUM |
| ABNZ | EFFECTIVE LENGTH | 0.350 INCHES MINIMUM AND 0.360 INCHES MAXIMUM |
| ABPA | UNDERCUT DIAMETER | 0.220 INCHES MINIMUM AND 0.230 INCHES MAXIMUM |
| ABPB | UNDER HEAD LENGTH | 0.475 INCHES MINIMUM AND 0.495 INCHES MAXIMUM |
| ABPE | UNDERCUT RADIUS | 0.025 INCHES MINIMUM AND 0.030 INCHES MAXIMUM |
| AMCS | FIRST END TAPER LENGTH | 0.050 INCHES MINIMUM AND 0.070 INCHES MAXIMUM |
| ANEE | GRIP LENGTH | 0.362 INCHES MINIMUM AND 0.375 INCHES MAXIMUM |
| CQFM | HARDNESS RATING | 35.0 ROCKWELL C MINIMUM OVERALL AND 39.0 ROCKWELL C MAXIMUM OVERALL |
| CRMG | FIRST END TAPER ANGLE | 13.0 DEGREES MINIMUM AND 17.0 DEGREES MAXIMUM |
| CRRG | PIN HEAD DIAMETER | 0.342 INCHES MINIMUM AND 0.343 INCHES MAXIMUM |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES OUTSIDE DIAMETER |
| HGTH | HEIGHT | 0.135 INCHES MINIMUM AND 0.145 INCHES MAXIMUM |
| MATT | MATERIAL | STEEL COMP 410 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5613 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | CHROMIUM OVERALL |
| STYL | STYLE DESIGNATOR | GROOVE |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
