| Part Number : 4057622 | Manufacturer : Turbo Power And Marine System Inc | ||
| NSN : 5315-01-125-2090 (5315011252090) | |||
| Item Name : Pin Shoulder Headless | CAGE Code : 11449 | ||
| NIIN : 01-125-2090 (011252090) | |||
| FSC Code : 5315 Nails Machine Keys and Pins | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 16749 | |||
| NCB Code : 01 | Country : USA | ||
Thank you for taking an interest in part number 4057622, that of which is listed with the description Pin Shoulder Headless; Manufactured by Turbo Power And Marine System Inc and listed alongside the NSN 5315011252090, part number 4057622 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 4057622 | Manufacturer : Turbo Power And Marine System Inc | ||
| NSN Number : 5315-01-125-2090 (5315011252090) | |||
| Item Name : Pin Shoulder Headless | CAGE Code : 11449 | ||
| NIIN : 011252090 | |||
| FSC CODE : 5315 Nails Machine Keys and Pins | |||
Thank you for taking an interest in part number 4057622, that of which is listed with the description Pin Shoulder Headless; Manufactured by Turbo Power And Marine System Inc and listed alongside the NSN 5315011252090, part number 4057622 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5315-01-125-2090 Item Description: PIN,SHOULDER,HEADLESS | 5315 | 011252090 | N | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 4057622 | 6 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAGZ | FIRST END STYLE | CHAMFERED |
| AAHP | SECOND END STYLE | SQUARE |
| AATR | SHANK LENGTH | 0.090 INCHES MINIMUM AND 0.110 INCHES MAXIMUM |
| AAVH | SHOULDER DIAMETER | 0.305 INCHES MINIMUM AND 0.315 INCHES MAXIMUM |
| AAZE | SHANK DIAMETER | 0.2200 INCHES MINIMUM AND 0.2215 INCHES MAXIMUM |
| ABHP | OVERALL LENGTH | 1.520 INCHES MINIMUM AND 1.560 INCHES MAXIMUM |
| ABRB | HOLE ARRANGEMENT STYLE | ONE END DRILLED |
| ABRC | FIRST HOLE DIAMETER | 0.065 INCHES MINIMUM AND 0.072 INCHES MAXIMUM |
| ABRE | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.125 INCHES NOMINAL |
| AMCS | FIRST END TAPER LENGTH | 0.020 INCHES MINIMUM AND 0.040 INCHES MAXIMUM |
| CQBB | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| CQFM | HARDNESS RATING | 30.0 ROCKWELL C MINIMUM OVERALL AND 38.0 ROCKWELL C MAXIMUM OVERALL |
| CQTR | SECOND SHANK DIAMETER | 0.220 INCHES MINIMUM AND 0.221 INCHES MAXIMUM |
| CRDY | FIRST END LOCATION | LONG END |
| CRMG | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES LONG SHANK |
| CWAS | SECOND SHANK LENGTH | 1.385 INCHES MINIMUM AND 1.415 INCHES MAXIMUM |
| FEAT | SPECIAL FEATURES | OD OF LONG SHANK MAY INCREASE TO 0.224 IN. AFTER FIRST 0.700 IN.; BOTH ENDS OF HOLE ARE COUNTERSUNK 60.0 DEG TO 0.110 IN. DIA |
| MATT | MATERIAL | STEEL OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5613 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| STYL | STYLE DESIGNATOR | SHOULDER |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
