| Part Number : 646704 | Manufacturer : Turbo Power And Marine System Inc | ||
| NSN : 5340-00-118-9646 (5340001189646) | |||
| Item Name : Bracket Double Angle | CAGE Code : 11449 | ||
| NIIN : 00-118-9646 (001189646) | |||
| FSC Code : 5340 Hardware Commercial | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 20354 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number 646704, that of which is listed with the description Bracket Double Angle; Manufactured by Turbo Power And Marine System Inc and listed alongside the NSN 5340001189646, part number 646704 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 646704 | Manufacturer : Turbo Power And Marine System Inc | ||
| NSN Number : 5340-00-118-9646 (5340001189646) | |||
| Item Name : Bracket Double Angle | CAGE Code : 11449 | ||
| NIIN : 001189646 | |||
| FSC CODE : 5340 Hardware Commercial | |||
Thank you for taking an interest in part number 646704, that of which is listed with the description Bracket Double Angle; Manufactured by Turbo Power And Marine System Inc and listed alongside the NSN 5340001189646, part number 646704 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5340-00-118-9646 Item PartTypeName: BRACKET,DOUBLE ANGLE | 5340 | 001189646 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 646704 | 6 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AHLN | SECOND LEG HOLE DIAMETER | 0.276 INCHES MINIMUM AND 0.286 INCHES MAXIMUM |
| AHLV | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM |
| AHLW | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.200 INCHES MINIMUM AND 0.220 INCHES MAXIMUM |
| AHPW | FIRST LEG THICKNESS | 0.056 INCHES MINIMUM AND 0.068 INCHES MAXIMUM |
| AHPX | SECOND LEG THICKNESS | 0.056 INCHES MINIMUM AND 0.068 INCHES MAXIMUM |
| AHPZ | CENTER SECTION HEIGHT | 0.933 INCHES MINIMUM AND 0.953 INCHES MAXIMUM |
| AHQA | CENTER SECTION WIDTH | 0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM |
| AHQB | CENTER SECTION THICKNESS | 0.056 INCHES MINIMUM AND 0.068 INCHES MAXIMUM |
| AHQN | FIRST LEG WIDTH | 0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM |
| AHRA | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM |
| AHRB | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM |
| AJFP | FIRST LEG END RADIUS | 0.344 INCHES MINIMUM AND 0.406 INCHES MAXIMUM |
| AJFQ | SECOND LEG END RADIUS | 0.344 INCHES MINIMUM AND 0.406 INCHES MAXIMUM |
| AJZU | FIRST LEG STYLE | END RADIUS |
| AKAU | FIRST LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| AKBU | SECOND LEG STYLE | END RADIUS |
| AKCU | SECOND LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| CSSP | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| CSSQ | FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| CSSR | SECOND LEG ANGLE | 90.0 DEGREES NOMINAL |
| MATT | MATERIAL | STEEL COMP 410 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5504 ASSN STD SINGLE MATERIAL RESPONSE |
| SFTT | SURFACE TREATMENT | CADMIUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | AMS 2400 ASSN STD SINGLE TREATMENT RESPONSE |
| STYL | STYLE DESIGNATOR | DOUBLE ANGLE |
| AARN | FABRICATION METHOD | MACHINED |
| ADLK | FIRST LEG LENGTH | 0.652 INCHES MINIMUM AND 0.712 INCHES MAXIMUM |
| ADLL | SECOND LEG LENGTH | 0.686 INCHES MINIMUM AND 0.738 INCHES MAXIMUM |
| AHLF | SECOND LEG WIDTH | 0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM |
| AHLK | FIRST LEG HOLE DIAMETER | 0.214 INCHES MINIMUM AND 0.224 INCHES MAXIMUM |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
