| Part Number : 4024127 | Manufacturer : Turbo Power And Marine System Inc | ||
| NSN : 5340-00-425-8664 (5340004258664) | |||
| Item Name : Bracket Angle | CAGE Code : 11449 | ||
| NIIN : 00-425-8664 (004258664) | |||
| FSC Code : 5340 Hardware Commercial | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 16900 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number 4024127, that of which is listed with the description Bracket Angle; Manufactured by Turbo Power And Marine System Inc and listed alongside the NSN 5340004258664, part number 4024127 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 4024127 | Manufacturer : Turbo Power And Marine System Inc | ||
| NSN Number : 5340-00-425-8664 (5340004258664) | |||
| Item Name : Bracket Angle | CAGE Code : 11449 | ||
| NIIN : 004258664 | |||
| FSC CODE : 5340 Hardware Commercial | |||
Thank you for taking an interest in part number 4024127, that of which is listed with the description Bracket Angle; Manufactured by Turbo Power And Marine System Inc and listed alongside the NSN 5340004258664, part number 4024127 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5340-00-425-8664 Item PartTypeName: BRACKET,ANGLE | 5340 | 004258664 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 4024127 | 2 | 9 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ADLK | FIRST LEG LENGTH | 0.767 INCHES MINIMUM AND 0.799 INCHES MAXIMUM |
| ADLL | SECOND LEG LENGTH | 0.900 INCHES NOMINAL |
| AHLF | SECOND LEG WIDTH | 0.920 INCHES MINIMUM AND 0.940 INCHES MAXIMUM |
| AHLG | SECOND LEG CORNER RADIUS | 0.109 INCHES MINIMUM AND 0.141 INCHES MAXIMUM |
| AHLK | FIRST LEG HOLE DIAMETER | 0.216 INCHES MINIMUM AND 0.220 INCHES MAXIMUM |
| AHLV | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.455 INCHES MINIMUM AND 0.475 INCHES MAXIMUM |
| AHLW | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.300 INCHES NOMINAL |
| AHLZ | SECOND LEG SLOT LENGTH | 0.500 INCHES MINIMUM AND 0.520 INCHES MAXIMUM |
| AHMA | SECOND LEG SLOT WIDTH | 0.230 INCHES MINIMUM AND 0.250 INCHES MAXIMUM |
| AHPW | FIRST LEG THICKNESS | 0.071 INCHES MINIMUM AND 0.078 INCHES MAXIMUM |
| AHPX | SECOND LEG THICKNESS | 0.071 INCHES MINIMUM AND 0.078 INCHES MAXIMUM |
| AHQP | FIRST LEG CORNER RADIUS | 0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM |
| AHQU | FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 0.624 INCHES NOMINAL |
| AHRA | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM |
| AHRB | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM |
| AKAU | FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| AKBU | SECOND LEG STYLE | CORNER RADIUS |
| AKCU | SECOND LEG HOLE ARRANGEMENT STYLE | ONE SLOT |
| CSSQ | FIRST LEG ANGLE | 95.0 DEGREES NOMINAL |
| MATT | MATERIAL | TITANIUM ALLOY |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 4911 ASSN STD SINGLE MATERIAL RESPONSE |
| STYL | STYLE DESIGNATOR | ANGLE |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
