| Part Number : 421117 | Manufacturer : Turbo Power And Marine System Inc | ||
| NSN : 5340-00-808-1002 (5340008081002) | |||
| Item Name : Bracket Angle | CAGE Code : 11449 | ||
| NIIN : 00-808-1002 (008081002) | |||
| FSC Code : 5340 Hardware Commercial | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 16900 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number 421117, that of which is listed with the description Bracket Angle; Manufactured by Turbo Power And Marine System Inc and listed alongside the NSN 5340008081002, part number 421117 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 421117 | Manufacturer : Turbo Power And Marine System Inc | ||
| NSN Number : 5340-00-808-1002 (5340008081002) | |||
| Item Name : Bracket Angle | CAGE Code : 11449 | ||
| NIIN : 008081002 | |||
| FSC CODE : 5340 Hardware Commercial | |||
Thank you for taking an interest in part number 421117, that of which is listed with the description Bracket Angle; Manufactured by Turbo Power And Marine System Inc and listed alongside the NSN 5340008081002, part number 421117 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5340-00-808-1002 Item PartTypeName: BRACKET,ANGLE | 5340 | 008081002 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 39-10794-4 | 2 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ADLL | SECOND LEG LENGTH | 0.970 INCHES NOMINAL |
| AHQW | FIRST LEG DISTANCE BETWEEN LOWER HOLE CENTERS ALONG WIDTH | 1.919 INCHES NOMINAL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6350 ASSN STD 1ST MATERIAL RESPONSE OR AMS 6355 ASSN STD 2ND MATERIAL RESPONSE |
| SFTT | SURFACE TREATMENT | CADMIUM |
| ADLK | FIRST LEG LENGTH | 0.730 INCHES NOMINAL |
| AGAV | END ITEM IDENTIFICATION | W/S:ENGINE,AIRCRAFT TF33-PW-102 (C-135E,EC-135H/K/P); AIRCRAFT,STRATOFORTRESS B-52; ENGINE,AIRCRAFT,TF-33-P-7 (C-141A/B); ENGINE,AIRCRAFT TF33-P-3/5/9 (C/EC-135,B-52H) |
| AHLF | SECOND LEG WIDTH | 4.220 INCHES NOMINAL |
| AHLG | SECOND LEG CORNER RADIUS | 0.219 INCHES NOMINAL |
| AHLK | FIRST LEG HOLE DIAMETER | 0.339 INCHES MINIMUM AND 0.349 INCHES MAXIMUM |
| AHPW | FIRST LEG THICKNESS | 0.028 INCHES MINIMUM AND 0.034 INCHES MAXIMUM |
| AHPX | SECOND LEG THICKNESS | 0.028 INCHES MINIMUM AND 0.034 INCHES MAXIMUM |
| AHQX | FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 0.031 INCHES NOMINAL |
| AHQY | FIRST LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH | 0.959 INCHES NOMINAL |
| AHRB | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.250 INCHES NOMINAL |
| AKAU | FIRST LEG HOLE ARRANGEMENT STYLE | THREE HOLES |
| AKBU | SECOND LEG STYLE | CORNER RADIUS |
| CSSQ | FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| MATT | MATERIAL | STEEL COMP 4130 OR STEEL COMP 8630 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | AMS 2400 ASSN STD SINGLE TREATMENT RESPONSE |
| STYL | STYLE DESIGNATOR | ANGLE |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
