| Part Number : 4055083 | Manufacturer : Turbo Power And Marine System Inc | ||
| NSN : 5340-01-081-1317 (5340010811317) | |||
| Item Name : Bracket Angle | CAGE Code : 11449 | ||
| NIIN : 01-081-1317 (010811317) | |||
| FSC Code : 5340 Hardware Commercial | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 16900 | |||
| NCB Code : 01 | Country : USA | ||
Thank you for taking an interest in part number 4055083, that of which is listed with the description Bracket Angle; Manufactured by Turbo Power And Marine System Inc and listed alongside the NSN 5340010811317, part number 4055083 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 4055083 | Manufacturer : Turbo Power And Marine System Inc | ||
| NSN Number : 5340-01-081-1317 (5340010811317) | |||
| Item Name : Bracket Angle | CAGE Code : 11449 | ||
| NIIN : 010811317 | |||
| FSC CODE : 5340 Hardware Commercial | |||
Thank you for taking an interest in part number 4055083, that of which is listed with the description Bracket Angle; Manufactured by Turbo Power And Marine System Inc and listed alongside the NSN 5340010811317, part number 4055083 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5340-01-081-1317 Item PartTypeName: BRACKET,ANGLE | 5340 | 010811317 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 4055083 | 2 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AHLN | SECOND LEG HOLE DIAMETER | 0.216 INCHES MINIMUM AND 0.226 INCHES MAXIMUM |
| AHLV | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.350 INCHES NOMINAL |
| AHLW | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.500 INCHES NOMINAL |
| AHPW | FIRST LEG THICKNESS | 0.056 INCHES MINIMUM AND 0.068 INCHES MAXIMUM |
| AHPX | SECOND LEG THICKNESS | 0.056 INCHES MINIMUM AND 0.068 INCHES MAXIMUM |
| AHQU | FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 0.954 INCHES NOMINAL |
| AHQX | FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 1.006 INCHES NOMINAL |
| AJFQ | SECOND LEG END RADIUS | 0.700 INCHES NOMINAL |
| AKAU | FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| AKBU | SECOND LEG STYLE | END RADIUS |
| AKCU | SECOND LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| CSSP | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| CSSQ | FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| MATT | MATERIAL | STEEL COMP 347 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-766,COND A,FINISH 2D FED SPEC SINGLE MATERIAL RESPONSE |
| STYL | STYLE DESIGNATOR | ANGLE |
| ADLK | FIRST LEG LENGTH | 1.497 INCHES NOMINAL |
| ADLL | SECOND LEG LENGTH | 1.720 INCHES NOMINAL |
| AHLF | SECOND LEG WIDTH | 0.250 INCHES NOMINAL |
| AHLK | FIRST LEG HOLE DIAMETER | 0.276 INCHES MINIMUM AND 0.286 INCHES MAXIMUM |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
