| Part Number : S300-13 | Manufacturer : Umpco Inc | ||
| NSN : 5340-00-485-6639 (5340004856639) | |||
| Item Name : Clamp Loop | CAGE Code : 18076 | ||
| NIIN : 00-485-6639 (004856639) | |||
| FSC Code : 5340 Hardware Commercial | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 17532 | |||
| NCB Code : 00 | Country : USA | ||
| Alternate P/N: S30013 | |||
Thank you for taking an interest in part number S300-13, that of which is listed with the description Clamp Loop; Manufactured by Umpco Inc and listed alongside the NSN 5340004856639, part number S300-13 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
|
3m unitek corporation
CAGE Code: 90444 |
259 holdings ltd
CAGE Code: 431P3 |
|
101communications inc
CAGE Code: 1WS16 |
4 ld inc
CAGE Code: 0ACW5 |
|
31 mile equipment co
CAGE Code: 07PE3 |
3com sas
CAGE Code: F9930 |
|
3 d machining inc
CAGE Code: 09SY7 |
3 phoenix inc
CAGE Code: 3NJE3 |
|
3m quante ag telekommunikation
CAGE Code: D2771 |
3m pharmaceuticals nz ltd
CAGE Code: EA139 |
|
2connect it b v
CAGE Code: HG221 |
3m touch systems canada ltd
CAGE Code: L0831 |
|
357319 ontario ltd
CAGE Code: 38510 |
3m health care service center
CAGE Code: 0UTW7 |
|
5 11 inc
CAGE Code: 3YEL6 |
| Part Number : S300-13 | Manufacturer : Umpco Inc | ||
| NSN Number : 5340-00-485-6639 (5340004856639) | |||
| Item Name : Clamp Loop | CAGE Code : 18076 | ||
| NIIN : 004856639 | |||
| FSC CODE : 5340 Hardware Commercial | |||
Thank you for taking an interest in part number S300-13, that of which is listed with the description Clamp Loop; Manufactured by Umpco Inc and listed alongside the NSN 5340004856639, part number S300-13 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5340-00-485-6639 Item PartTypeName: CLAMP,LOOP | 5340 | 004856639 | P | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | 0 | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| S500-13 | 2 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAAL | TONGUE HOLE TYPE | ROUND,UNTHREADED |
| ABMK | OVERALL WIDTH | 0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM |
| ABMZ | DIAMETER | 0.199 INCHES MINIMUM AND 0.209 INCHES MAXIMUM |
| ABPX | MATERIAL THICKNESS | 0.046 INCHES MINIMUM AND 0.056 INCHES MAXIMUM |
| AGAV | END ITEM IDENTIFICATION | W/S: ENGINE,AIRCRAFT TF33PW102 (C135E,EC135H/K/P); ENGINE,AIRCRAFT TF33P3/5/9 (C/EC135,B52H); ENGINE,AIRCRAFT,TF33P7 (C141A/B); ENGINE,AIRCRAFT,TF33100 (E3A/B/C); AIRCRAFT,STRATOFORTRESS B52; AIRCRAFT,STRATOLIFTER C |
| AZCY | CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE | 0.847 INCHES MINIMUM AND 0.907 INCHES MAXIMUM |
| AZDC | DISTANCE FROM LOOP CENTER TO TONGUE END | 1.060 INCHES MINIMUM AND 1.130 INCHES MAXIMUM |
| BZTN | LOOP INSIDE DIAMETER | 0.812 INCHES NOMINAL |
| MATT | MATERIAL | PLASTIC TETRAFLUOROETHYLENE CUSHION |
| MATT | MATERIAL | STEEL CORROSION RESISTING BAND |
| STYL | STYLE DESIGNATOR | SINGLE LOOP |
| ZZZK | SPECIFICATION/STANDARD DATA | 81205-BACC10EP MANUFACTURERS SPECIFICATION |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
