Part Number : PWA55740 | Manufacturer : United Technologies Corporation | ||
NSN : 4920-01-157-0014 (4920011570014) | |||
Item Name : Holding Base Compre | CAGE Code : 77445 | ||
NIIN : 01-157-0014 (011570014) | |||
FSC Code : 4920 Aircraft Maintenance And Repair Shop Specialized Equipment | |||
FSG Code : 49 Maintenance And Repair Shop Equipment | |||
INC Code : 77777 | |||
NCB Code : 01 | Country : USA |
Thank you for taking an interest in part number PWA55740, that of which is listed with the description Holding Base Compre; Manufactured by United Technologies Corporation and listed alongside the NSN 4920011570014, part number PWA55740 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
Part Number : PWA55740 | Manufacturer : United Technologies Corporation | ||
NSN Number : 4920-01-157-0014 (4920011570014) | |||
Item Name : Holding Base Compre | CAGE Code : 77445 | ||
NIIN : 011570014 | |||
FSC CODE : 4920 Aircraft Maintenance And Repair Shop Specialized Equipment |
Thank you for taking an interest in part number PWA55740, that of which is listed with the description Holding Base Compre; Manufactured by United Technologies Corporation and listed alongside the NSN 4920011570014, part number PWA55740 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
MRC | Criteria | Characteristic |
---|---|---|
AGAV | III END ITEM IDENTIFICATION | F100-PW-100/F100-PW-200 ENGINE |
TEXT | GENERAL CHARACTERISTICS ITEM DESCRIPTION | CONSISTS OF CIRCULAR STEEL PLATE WITH 11.000 INCH UPRIGHT LOCATOR; DIMENSIONS: 27.500 INCHES DIAMETER,11.000 INCHES HIGH; USED WITH PWA55746 ADAPTER,PWA55747 PLATE AND DRILL PRESS FOR MACHINING HOLES IN THE CASE REAR REPLACEMENT FLANGE |
SR-5 | MANUFACTURERS CODE | 77445 |
SR-5 | THE MANUFACTURERS DATA | |
SR-5 | DESIGN CONTROL REFERENCE | PWA55740 |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote