| Part Number : PWA80888 | Manufacturer : United Technologies Corporation | ||
| NSN : 5120-01-382-2675 (5120013822675) | |||
| Item Name : Puller Mechanical | CAGE Code : 77445 | ||
| NIIN : 01-382-2675 (013822675) | |||
| FSC Code : 5120 Hand Tools Nonedged Nonpowered | |||
| FSG Code : 51 Hand Tools | |||
| INC Code : 18913 | |||
| NCB Code : 01 | Country : USA | ||
Thank you for taking an interest in part number PWA80888, that of which is listed with the description Puller Mechanical; Manufactured by United Technologies Corporation and listed alongside the NSN 5120013822675, part number PWA80888 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : PWA80888 | Manufacturer : United Technologies Corporation | ||
| NSN Number : 5120-01-382-2675 (5120013822675) | |||
| Item Name : Puller Mechanical | CAGE Code : 77445 | ||
| NIIN : 013822675 | |||
| FSC CODE : 5120 Hand Tools Nonedged Nonpowered | |||
Thank you for taking an interest in part number PWA80888, that of which is listed with the description Puller Mechanical; Manufactured by United Technologies Corporation and listed alongside the NSN 5120013822675, part number PWA80888 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| MRC | Criteria | Characteristic |
|---|---|---|
| ZZZV | III FSC APPLICATION DATA | JAW SET, PULLER NO. 1 BEARING REAR INNER RACE, LPC DRIVE SHAFT ENGINE |
| SR-5 | THE MANUFACTURERS DATA | |
| FTLD | III FUNCTIONAL DESCRIPTION | PULLER JAW SET IS REQUIRED TO REMOVE THE NO. 1 REAR BEARING INNER RACE WHILE THE LOW PRESSURE COMPRESSOR DRIVE SHAFT IS IN THE ENGINE. THIS TOOL USED FOR MAINTENANCE ON F117-PW-100 ENGE |
| FEAT | SPECIAL FEATURES | PULLER JAW SET CONSISTS OF A STEEL PLATE, A STEEL RETAINING RING, THREESTEEL WASHER AND NUT SETS. JAWS ENGAGE THE NO. 1 BEARING REAR INNER RACE. THE RETAINING RING HOLDS THE JAWS IN PLACE. LEGS OF JAWS EXTEND THROUGH PLATE. PLATE MATES W/ ANOTHER TOOL THAT PROVIDES THE FORCE TO OVERCOME THE TIGHT FIT |
| SR-5 | MANUFACTURERS CODE | 77445 |
| SR-5 | DESIGN CONTROL REFERENCE | PWA80888 |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
