| Part Number : 57305 | Manufacturer : United Technologies Corporation | ||
| NSN : 5305-00-149-9684 (5305001499684) | |||
| Item Name : Screw Machine | CAGE Code : 77445 | ||
| NIIN : 00-149-9684 (001499684) | |||
| FSC Code : 5305 Screws | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 06657 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number 57305, that of which is listed with the description Screw Machine; Manufactured by United Technologies Corporation and listed alongside the NSN 5305001499684, part number 57305 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
|
3m united kingdom plc
CAGE Code: K0993,K8767 |
313 aerospace llc
CAGE Code: 3VEK3 |
|
2 s 2 inc
CAGE Code: 5A8X0,787R6 |
3 m federal systems dept
CAGE Code: 68352 |
|
5 11 inc
CAGE Code: 3YEL6 |
2101 llc
CAGE Code: 1GH76 |
|
2415779 ontario inc
CAGE Code: L09L7 |
600 cranes australasia pty ltd
CAGE Code: Z9Z76 |
|
10zig technology inc
CAGE Code: 49E04 |
3m purification pty limited
CAGE Code: Z5295 |
|
1 source electronic components inc
CAGE Code: 3FY68 |
28eme groupe geographique
CAGE Code: FAR17 |
|
3m unitek corporation
CAGE Code: 90444 |
21st century electronics inc
CAGE Code: 60092 |
|
3m deutschland gmbh
CAGE Code: D2607 |
| Part Number : 57305 | Manufacturer : United Technologies Corporation | ||
| NSN Number : 5305-00-149-9684 (5305001499684) | |||
| Item Name : Screw Machine | CAGE Code : 77445 | ||
| NIIN : 001499684 | |||
| FSC CODE : 5305 Screws | |||
Thank you for taking an interest in part number 57305, that of which is listed with the description Screw Machine; Manufactured by United Technologies Corporation and listed alongside the NSN 5305001499684, part number 57305 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-00-149-9684 Item PartTypeName: SCREW,MACHINE | 5305 | 001499684 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 57305 | 2 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.380 INCHES MAXIMUM |
| AASB | FASTENER LENGTH | 2.290 INCHES MINIMUM AND 2.310 INCHES MAXIMUM |
| AASK | HEAD STYLE | FLAT COUNTERSUNK |
| AASL | HEAD DIAMETER | 0.580 INCHES MINIMUM AND 0.600 INCHES MAXIMUM |
| ABQZ | INTERNAL DRIVE STYLE | SLOT |
| AHYM | NOMINAL THREAD DIAMETER | 0.312 INCHES |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CQFM | HARDNESS RATING | 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM |
| CRSQ | COUNTERSINK ANGLE | 82.0 DEGREES NOMINAL |
| CYAU | SCREW MATERIAL | STEEL COMP 8740 |
| CYBA | SCREW SURFACE TREATMENT | CADMIUM |
| CYBE | SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | AMS 2400 ASSN STD SINGLE TREATMENT RESPONSE |
| FEAT | SPECIAL FEATURES | 1 HOLE 0.125 IN. DIA,0.140 IN. DEEP DRILLED PARALLEL TO LONGITUDINAL AXIS |
| THSD | THREAD SERIES DESIGNATOR | UNF |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
