| Part Number : AN3420-12 | Manufacturer : United Technologies Corporation | ||
| NSN : 5305-00-298-1107 (5305002981107) | |||
| Item Name : Screw Shoulder | CAGE Code : 77445 | ||
| NIIN : 00-298-1107 (002981107) | |||
| FSC Code : 5305 Screws | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 22846 | |||
| NCB Code : 00 | Country : USA | ||
| Alternate P/N: AN342012 | |||
Thank you for taking an interest in part number AN3420-12, that of which is listed with the description Screw Shoulder; Manufactured by United Technologies Corporation and listed alongside the NSN 5305002981107, part number AN3420-12 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : AN3420-12 | Manufacturer : United Technologies Corporation | ||
| NSN Number : 5305-00-298-1107 (5305002981107) | |||
| Item Name : Screw Shoulder | CAGE Code : 77445 | ||
| NIIN : 002981107 | |||
| FSC CODE : 5305 Screws | |||
Thank you for taking an interest in part number AN3420-12, that of which is listed with the description Screw Shoulder; Manufactured by United Technologies Corporation and listed alongside the NSN 5305002981107, part number AN3420-12 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-00-298-1107 Item PartTypeName: SCREW,SHOULDER | 5305 | 002981107 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 1292707-103 | 2 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.450 INCHES MINIMUM AND 0.480 INCHES MAXIMUM |
| AASB | FASTENER LENGTH | 2.850 INCHES MINIMUM AND 2.880 INCHES MAXIMUM |
| AASK | HEAD STYLE | FLAT COUNTERSUNK |
| AASL | HEAD DIAMETER | 1.080 INCHES NOMINAL |
| AATN | SHOULDER DIAMETER | 0.523 INCHES MINIMUM FIRST SHOULDER AND 0.624 INCHES MAXIMUM FIRST SHOULDER |
| AATX | SHOULDER LENGTH | 2.210 INCHES NOMINAL FIRST SHOULDER |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | 0.108 INCHES MINIMUM FIRST HOLE AND 0.113 INCHES MAXIMUM FIRST HOLE |
| ABQZ | INTERNAL DRIVE STYLE | HEXAGON |
| AHYM | NOMINAL THREAD DIAMETER | 0.375 INCHES |
| ASDB | WIDTH ACROSS FLATS | 0.189 INCHES MINIMUM AND 0.193 INCHES MAXIMUM |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CQBC | MINIMUM TENSILE STRENGTH | 180000 POUNDS PER SQUARE INCH |
| CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 0.100 INCHES MINIMUM FIRST HOLE AND 0.130 INCHES MAXIMUM FIRST HOLE |
| CWYB | SHOULDER SHAPE | ROUND FIRST SHOULDER |
| FEAT | SPECIAL FEATURES | CONCENTRIC HOLE ALONG THE LONGITUDINAL CENTER LINE OF BOLT,0.181 IN. MIN,0.187 IN. MAX DIA BY 1.770 IN. DEEP |
| MATT | MATERIAL | STEEL COMP 4130 OVERALL |
| SFTT | SURFACE TREATMENT | CADMIUM OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
